No products in the cart.
Electronic Parts, Module, OLED Display Module
0.91 OLED Display Module (White)
Availability:
In stock
0.91″ min OLED display screen with 128X32 resolution and SSD1306 chipset
Standard IIC serial communication interface pinout compatible with most MCU development board such as Arduinos, Raspberry Pi,C51 series etc.
6,700 Ks
In stock
This mini OLED display module is equipped with SSD1306 chipset and 128X32 blue color display. On-board standard IIC serial connunication interface with 3.3V-5V wide voltage input enable you to connect it with the MCU development board easily to develop your OLED display projects.
| Color | White |
|---|
Screen Display Size: 0.91″
Display Resolution: 128X32 pixel
Display Color: blue
Communication Interface:IIC(GND,VCC,SCL,SDA)
Working Voltage: DC 3.3-5V
Module Size: 38 X 12 X 2.4mm/1.50 X 0.47 X 0.09inch(L*W*H)
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, OLED Display Module
0.91 OLED Display Module (Blue)
10 in stock- 0.91 inch I2C/IIC 128×32 OLED Display Module
- Work perfectly well without the need of back light.
- 128*32 high resolution, ultra wide viewing angle
- The display is self-illuminating
- Power requirement is low
- Fully compatible with multiple controlling chips including Arduino and more.
- Better performance characteristics than traditional LCD and LED displays.
SKU: EAP-000020 - Electronic Parts, Module, OLED Display Module
TM1637 Clock Display Module
24 in stock- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
- The counter project using 7 segment display.
- 4 M2 screws positioning holes for easy installation
SKU: EAP-000007 - Electronic Parts, Module, Detection & Sensor Module
MFRC-522 RFID Reader Module
7 in stock- RC522 Features
- 13.56MHz RFID module
- Operating voltage: 2.5V to 3.3V
- Communication : SPI, I2C protocol, UART
- Maximum Data Rate: 10Mbps
- Read Range: 5cm
- Current Consumption: 13-26mA
- Power down mode consumption: 10uA (min)
SKU: EAP-000005 - Electronic Parts, Development Board, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
In StockElectronic Parts, Development Board, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
6 in stock- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-000607
There are no reviews yet.