No products in the cart.
Electronic Parts, LCD Display Module, Module
16×2 Character LCD Display Module
Availability:
In stock
- Show control information (on, off, elapsed time), temperature, time, or numbers/special characters
- Access all custom characters stored in ROM
- Debugging for microcontroller projects
- Useful in dark and bright environments
4,600 Ks
- 16×2 Character LCD Display Module (Blue)
- 16×2 Character LCD Display Module (Green)
| Color | Blue, Green |
|---|
- Display capacity: 16 character x 2 row
- Display color: Blue backlit
- Character size: 2.95 mm wide x 4.35 mm high
- Character pixels: 5 W x 7 H
- Voltage requirements: 5 VDC +/- 0.5V
- Current requirements: 2 mA @ 5 VDC
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Development Board, STM
STM32F103C8T6 ARM Development Board
9 in stock- 100% Brand new and high-quality STM32 Board
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
- Reset(POR/PDR).
- 4-16MHz crystal.
- Onboard Mini USB interface, you can give the board power supply and USB communication.
SKU: EAP-000021 - Electronic Parts, Module
DS3231 RTC Module
17 in stock- Weight: 8g
- Operating voltage :3.3 – 5 .5 V
- Clock chip: high-precision clock chip DS3231
- Clock Accuracy :0-40 ℃ range, the accuracy 2ppm, the error was about 1 minute
- Calendar alarm clock with two
- Programmable square-wave output
- Real time clock generator seconds, minutes, hours, day, date, month and year timing and provide valid until the year 2100 leap year compensation
- Chip temperature sensor comes with an accuracy of ± 3 ℃
- Memory chips: AT24C32 (storage capacity 32K)
- I2C bus interface, the maximum transmission speed of 400KHz (working voltage of 5V)
SKU: EAP-000006 - Electronic Parts, Module, Relay Module
2 Channel Relay Module (5V,10A)
7 in stock- Switching mains loads
- Home automation
- Battery backup
- High current load switching
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
SKU: EAP-000012 - Electronic Parts, Module, OLED Display Module
0.91 OLED Display Module (Blue)
4 in stock- 0.91 inch I2C/IIC 128×32 OLED Display Module
- Work perfectly well without the need of back light.
- 128*32 high resolution, ultra wide viewing angle
- The display is self-illuminating
- Power requirement is low
- Fully compatible with multiple controlling chips including Arduino and more.
- Better performance characteristics than traditional LCD and LED displays.
SKU: EAP-000020
There are no reviews yet.