, ,

16×2 Character LCD Display Module + I2C Expander Module (Green)

SKU: EAP-000017
Availability:

Out of stock


  • Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
  • I2C adapter allows flexibility in connections
  • I2C Reduces the overall wirings
  • 16 characters wide, 2 rows
  • White text on the green background
  • Single LED backlight included can be dimmed easily with a resistor or PWM.

7,000 Ks

Out of stock

This is LCD 1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on Liquid Crystal Display into your project. The display is 16 character by 2 line display has a very clear and high contrast white text upon background/backlight.

This is great backlight LCD display. It is fantastic for Arduino based project. This LCD1602 LCD Display is very easy to interface with Arduino or Other Microcontrollers.

This display overcomes the drawback of LCD 1602 Parallel LCD Display in which you’ll waste about 8 Pins on your Arduino for the display to get working. Luckily in this product, an I2C adapter is directly soldered right onto the pins of the display. So all you need to connect are the I2C pins, which shows a good library and little of coding.

The I2C is a type of serial bus developed by Philips, which uses two bidirectional lines, called SDA (Serial Data Line) and SCL (Serial Clock Line). Both must be connected via pulled-up resistors. The usage voltages are standard as 5V and 3.3V.

If you already have the I2C adapter soldered onto the board like in this product, the wiring is quite easy. You should usually have only four pins to hook up. VCC and GND of course. The LCD display works with 5 Volts. So we go for the 5V Pin.

The values shown on the display can be either a simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing.

Display Format20×4 Character
Interface6800 4-bit Parallel , 6800 8-bit Parallel
IC or EquivalentAIP31066 , HD44780, KS0066 , SPLC780 , ST7066
AppearanceBlack on Yellow Green
ConnectionPin Header
Outline Dimension98.00(W)x60.0(H)x14.0(T)mm
Visual Area76.00×25.20mm
Active Area70.40(W)x20.80(H)mm
Dot (Pixel) Size0.55×0.55mm
Dot (Pixel) Pitch0.60×0.60mm
IC PackageCOB
Display TypeSTN-LCD Yellow Green
Touch Panel OptionalNo
Sunlight ReadableYes
Viewing Direction6:00
Backlight ColorYellow Green Color
Backlight Current (Typ)75mA
Power Supply(Typ)3.3V, 5V
Supply Current for LCM(Max)2000uA
Operating Temperature-20℃~70℃
Storage Temperature-30℃~80℃

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.