No products in the cart.
Electronic Parts, LCD Display Module, Module
20×4 LCD Display Module + I2C Expander Module
Availability:
In stock
- 2004 204 20X4 Character LCD Display Module Blue Backlight
- Blue & Green backlight
- Fully assembled and tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
12,800 Ks
ERM2004SBS-3 is small size 20 characters wide,4 rows character lcd module,SPLC780C controller (Industry-standard HD44780 compatible controller),6800 4/8-bit parallel interface,single led backlight with white color included can be dimmed easily with a resistor or PWM,stn- blue lcd negative,white text on the blue color,wide operating temperature range,rohs compliant,built in character set supports English/Japanese text, see the SPLC780C datasheet for the full character set, It’s optional for pin header connection,5V or 3.3V power supply and I2C adapter board for arduino.
It’s easily controlled by MCU such as 8051,PIC,AVR,ARDUINO,ARM and Raspberry Pi.It can be used in any embedded systems,industrial device,security,medical and hand-held equipment.
| Color | Blue, Green |
|---|
| Display Format | 20×4 Character |
|---|---|
| Interface | 6800 4-bit Parallel , 6800 8-bit Parallel |
| IC or Equivalent | HD44780, KS0066 , SPLC780 |
| Appearance | White on Blue |
| Connection | Pin Header |
| Outline Dimension | 77.0(W)x47.0(H)x13.0(T)mm |
| Visual Area | 60.60×22.60mm |
| Active Area | 55.12(W)x17.56(H)mm |
| Dot (Pixel) Size | 0.46×0.42mm |
| Dot (Pixel) Pitch | 0.51×0.47mm |
| IC Package | COB |
| Display Type | STN-LCD Blue |
| Touch Panel Optional | No |
| Sunlight Readable | Yes |
| Viewing Direction | 6:00 |
| Backlight Color | White Color |
| Backlight Current (Typ) | 40mA |
| Power Supply(Typ) | 3.3V, 5V |
| Supply Current for LCM(Max) | 2000uA |
| Operating Temperature | -20℃~70℃ |
| Storage Temperature | -30℃~80℃ |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, Detection & Sensor Module
MFRC-522 RFID Reader Module
7 in stock- RC522 Features
- 13.56MHz RFID module
- Operating voltage: 2.5V to 3.3V
- Communication : SPI, I2C protocol, UART
- Maximum Data Rate: 10Mbps
- Read Range: 5cm
- Current Consumption: 13-26mA
- Power down mode consumption: 10uA (min)
SKU: EAP-000005 - Electronic Parts, Development Board, ESPRESSIF(ESP)
ESP32 Development Board
out of stock- Built in Wi-Fi module of standard 802.11
- Wi-Fi module operate in range of 2.4 GHz – 2.5 GHz
- Three modes of operation: 1. Access point. 2. Client. 3. Access point + station
- Dual core microprocessor of 32 – bit
- Operating voltage is 3.3 V
- Clock frequency from 80 MHz and goes up to 240 MHz
- SRAM memory is of 512 KB
- ROM memory is 448 KB
- External flash memory is supported and is up to 32 Mb i.e. 4MB
- Maximum current in each pin is 12 mA but 6 mA is recommended to use
- It has 36 general purpose input / output pins
- General purpose input / output pins comes up with PWM / I2C and SPI functionality
- Bluetooth version 4.2 is available and Bluetooth low energy (BLE) version
- 2 to 3.6 V operating voltage
- Deep sleep current of 2.5 µA
- 10 electrode capacitive touch support
- Hardware supported encryption for AES, ECC, RSA – 4096, SHA2
- On board PCB antenna or IPEX connector which act as external antenna
- Operating temperature lies in range of -40°C to +125°C
SKU: EAP-000025 - Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
8 in stock- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-000011
There are no reviews yet.