No products in the cart.
Development Board, Electronic Parts, ESPRESSIF(ESP), Trending Items
ESP32-C6 Super Mini Development Board
Availability:
Out of stock
The ESP32-C6 Super Mini Development Board is a compact, high-performance wireless development board based on the ESP32-C6 RISC-V microcontroller. It supports Wi-Fi 6 (802.11ax), Bluetooth 5 LE, and IEEE 802.15.4 (Thread & Zigbee), making it an excellent choice for next-generation IoT, smart home, Matter, automation, and low-power embedded applications. Its ultra-compact design is ideal for projects with limited space.
29,200 Ks
Out of stock
- MCU: ESP32-C6 32-bit RISC-V Single-Core Processor (Up to 160MHz)
- Flash Memory: 4MB
- Wireless: Wi-Fi 6 (2.4GHz 802.11ax), Bluetooth 5 LE, IEEE 802.15.4 (Thread / Zigbee)
- USB Interface: USB Type-C
- Operating Voltage: 3.3V (5V via USB)
- GPIO: Up to 22 GPIO Pins
- Interfaces: UART, SPI, I2C, I2S, PWM, ADC
- Low Power: Deep Sleep Mode Supported
- Programming Support: Arduino IDE, ESP-IDF, PlatformIO, MicroPython
- Applications: IoT, Smart Home, Matter, Zigbee, Thread, Wireless Sensors, Automation, Robotics, and Embedded Systems
- CPU: 32-bit RISC-V Single Core @160MHz
- Flash: 4MB (Typical)
- Wi-Fi: Â Wi-Fi 6 (802.11ax)
- Bluetooth: Bluetooth 5 LE
- Zigbee:  ✅ IEEE 802.15.4
- Thread: ✅
- Matter: ✅ Native Support
- GPIO: Â ~22
- USB: USB Type-C
- Power Consumption: Â Similar / Better in Wi-Fi 6 modes
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module
DS3231 RTC Module
Out of stock- Weight: 8g
- Operating voltage :3.3 – 5 .5 V
- Clock chip: high-precision clock chip DS3231
- Clock Accuracy :0-40 ℃ range, the accuracy 2ppm, the error was about 1 minute
- Calendar alarm clock with two
- Programmable square-wave output
- Real time clock generator seconds, minutes, hours, day, date, month and year timing and provide valid until the year 2100 leap year compensation
- Chip temperature sensor comes with an accuracy of ± 3 ℃
- Memory chips: AT24C32 (storage capacity 32K)
- I2C bus interface, the maximum transmission speed of 400KHz (working voltage of 5V)
SKU: EAP-000006 - Development Board, Electronic Parts, ESPRESSIF(ESP)
ESP32-Cam Development Board
30 in stock- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Up to 240MHz, up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRAM
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras with built-in flash
- Support for images WiFI upload
- Support TF card
- Support multiple sleep modes
- Embedded Lwip and FreeRTOS
- Support STA/AP/STA+AP working mode
- Support Smart Config/AirKiss One-click distribution network
- Support for serial local upgrade and remote firmware upgrade (FOTA)
SKU: EAP-000024 - Electronic Parts, Module, OLED Display Module
0.91 OLED Display Module (Blue)
75 in stock- 0.91 inch I2C/IIC 128×32 OLED Display Module
- Work perfectly well without the need of back light.
- 128*32 high resolution, ultra wide viewing angle
- The display is self-illuminating
- Power requirement is low
- Fully compatible with multiple controlling chips including Arduino and more.
- Better performance characteristics than traditional LCD and LED displays.
SKU: EAP-000020 - Detection & Sensor Module, Electronic Parts, Module
HTU21D Temperature and Humidity Sensor Module
Stock outDetection & Sensor Module, Electronic Parts, ModuleHTU21D Temperature and Humidity Sensor Module
Out of stock- ​Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10k resistors to limit 5V signals
- Only one HTU21D sensor can reside on the I2C bus at a time
SKU: EAP-000002
There are no reviews yet.