No products in the cart.
Development Board, Electronic Parts, ESPRESSIF(ESP) 
ESP32-Cam Development Board With Base
Availability:
In stock
- Clock frequency: 240 MHz,
- computing power up to 600 DMIPS
- Built-in 520 KB SRAM,
- external 4M PSRAM Voltage: 5V
64,000 Ks
In stock
Contains the OV2640 camera module. Supports the OV2640 and OV7670 cameras. The matching CH340G USB-to-serial adapter is included. It has WLAN on-board and is characterized by its particularly low power consumption.
| Brands |
|---|
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module
DS3231 RTC Module
Out of stock- Weight: 8g
- Operating voltage :3.3 – 5 .5 V
- Clock chip: high-precision clock chip DS3231
- Clock Accuracy :0-40 ℃ range, the accuracy 2ppm, the error was about 1 minute
- Calendar alarm clock with two
- Programmable square-wave output
- Real time clock generator seconds, minutes, hours, day, date, month and year timing and provide valid until the year 2100 leap year compensation
- Chip temperature sensor comes with an accuracy of ± 3 ℃
- Memory chips: AT24C32 (storage capacity 32K)
- I2C bus interface, the maximum transmission speed of 400KHz (working voltage of 5V)
SKU: EAP-000006 - DIY Items, Electronic Parts, Module, Relay Module
8 Channel Relay Module (5V,10A)
47 in stockDC or AC signal, control, you can control the 220V AC load;
There is a normally open and one normally close contact;
The module is compliant with international safety standards, control and load areas isolation trenches.SKU: EAP-000010 - Development Board, Electronic Parts, ESPRESSIF(ESP)
ESP32 Development Board
Out of stock- Built in Wi-Fi module of standard 802.11
- Wi-Fi module operate in range of 2.4 GHz – 2.5 GHz
- Three modes of operation: 1. Access point. 2. Client. 3. Access point + station
- Dual core microprocessor of 32 – bit
- Operating voltage is 3.3 V
- Clock frequency from 80 MHz and goes up to 240 MHz
- SRAM memory is of 512 KB
- ROM memory is 448 KB
- External flash memory is supported and is up to 32 Mb i.e. 4MB
- Maximum current in each pin is 12 mA but 6 mA is recommended to use
- It has 36 general purpose input / output pins
- General purpose input / output pins comes up with PWM / I2C and SPI functionality
- Bluetooth version 4.2 is available and Bluetooth low energy (BLE) version
- 2 to 3.6 V operating voltage
- Deep sleep current of 2.5 µA
- 10 electrode capacitive touch support
- Hardware supported encryption for AES, ECC, RSA – 4096, SHA2
- On board PCB antenna or IPEX connector which act as external antenna
- Operating temperature lies in range of -40°C to +125°C
SKU: EAP-000025 - DIY Items, Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
3 in stock- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-000011
There are no reviews yet.