L293D Motor Driver module is compatible with ESP12E Dev Kit and NodeMCU. This shield board is driven by the power full-bridge chip L293DD which can directly drive 2-channels DC motors or one-channel stepper motor. In this motor shield board, the IO port of ESP-12E Dev Kit is used as the control port. The logic chip configured inside can finish IC driven. Thus, the shield board has four ports: D1, D2, D3, and D3, which are used as PWMA(motor A), PWMB (motor B), DA (direction of motor A), and DB (direction of motor B), respectively. In addition, this shield board has many pins, such as VIN, 3.3V, DIO, AIO, SDIO, UART, SPI, RST, and EN, thus can conveniently connect all kinds of sensors (e.g., temperature and humidity, buzzer, light, relay sensor, etc.)
Electronic Parts, Module, Motor Driver Module
ESP8266 CP2102 Motor Driver Shield (L293D)
SKU: EAP-000977
Availability:
In stock
- Motor Power Supply Range: 4.5V ~ 36V
- Control Power Range: 4.5V ~ 9V (10VMAX)
- Logic Operating Current: ≤60mA
- Drive part of the work current Io: ≤1.2A
4,500 Ks
In stock
Based on 0 reviews
0.0 overall
0
0
0
0
0
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Development Board, ESPRESSIF(ESP)
ESP32 Development Board with 1.14 Inch LCD
In StockElectronic Parts, Development Board, ESPRESSIF(ESP)ESP32 Development Board with 1.14 Inch LCD
2 in stockRated 5.00 out of 5(1)- Wi-Fi Mode Station/SoftAP/SoftAP+Station/P2P
- Security mechanism WPA/WPA2/WPA2-Enterprise/WPS
- Encryption Type AES/RSA/ECC/SHA
- Firmware upgrade UART download/OTA(Through network/host to download and write firmware)
- Software Development Support cloud server development /SDK for user firmware development
- Networking protocol IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT
- User Configuration AT + Instruction set, cloud server, android/iOSapp
- OS FreeRTOS
SKU: EAP-00002267,500 Ks - Electronic Parts, Module, OLED Display Module
0.96 OLED Display Module (128×64) (Blue)
3 in stock0 out of 5(0)- Work perfectly well without the need of back light.
- 128*64 high resolution, ultra wide viewing angle
- Super low power consumption–only 0.08W when the whole screen lights up and 0.06W when displaying characters
- Fully compatible with multiple controlling chips including Arduino and more.
- Support a wide range of voltage input
SKU: EAP-0000199,200 Ks - Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
6 in stock0 out of 5(0)- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-0000116,000 Ks - Electronic Parts, Module
YX5300 Mp3 Music Player Module
2 in stock0 out of 5(0)- Voice Broadcasting of Vehicle Navigation
- Highway transportation inspection and toll station voice prompt
- Voice prompts for safety inspection of railway stations and bus stations
- Voice prompt of electric power, communication and financial business hall
- Verify the voice prompt in and out of the vehicle passage
- Voice prompt of frontier inspection channel of public security
- Voice notice for safe driving of electric sightseeing car
- Automatic alarm of mechanical and electrical equipment failure
- Fire sound alarm prompt
- Support sampling frequency (kHz):8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48
- Support file format:MP3/WAV
- Support Micro SD card, Micro SDHC Card
- 30 class adjustable volume
- UART TTL serial control playback mode, baud rate is 9600bps
- Power supply can be 3.2 ~ 5.2VDC
- Size:43mm x 25mm
SKU: EAP-0000087,300 Ks
There are no reviews yet.