, ,

NEO 6M GPS Module with External Antenna

SKU: EAP-001189

In stock

  • 5Hz position update rate
  • Operating temperature range: -40 TO 85°CUART TTL socket
  • EEPROM to save configuration settings
  • Rechargeable battery for Backup
  • The cold start time of 38 s and Hot start time of 1 s
  • Supply voltage: 3.3 V
  • Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
  • SuperSense ® Indoor GPS: -162 dBm tracking sensitivity

11,000 Ks

In stock


NEO 6M GPS Module With EEPROM For Arduino And Flight Controllers [GY-NEO6MV2] is a GPS module with ceramic edge antenna, to diagnose GPS data for various flight control that provide GPS computer test software such as MWC/AeroQuad. This GPS configuration data is not disappeared any time, because this data is saved on the internal EEPROM with a backup battery in power off situation.
This GPS module has high quality and ability against low price and size. This module can communicate with the Arduino, Raspberry Pi, MSP430, and MSP432 through the UART interface.
Work guides:
Power on, the module will automatically acquire satellite signals and a fix position.
Once it has a fix position, the module will blink the onboard LED.
This LED will continue to blink while the module has a fix position.

This is a complete GPS module that is based on the Ublox NEO-6M. This unit uses the latest technology from Ublox to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.

The Ublox NEO-6M GPS engine on this board is a quite good one, with the high precision binary output. It has also high sensitivity for indoor applications. UBLOX NEO-6M GPS Module has a battery for power backup and EEPROM for storing configuration settings. The antenna is connected to the module through a ufl cable which allows for flexibility in mounting the GPS such that the antenna will always see the sky for best performance. This makes it powerful to use with cars and other mobile applications.

The Ublox GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-center software for configuring the GPS and changing the settings and much more.

SKU: EAP-001189 Categories: , ,

Based on 0 reviews

0.0 overall

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.