No products in the cart.
Electronic Parts, LCD Display Module, Module
SPI TFT Display Module without Touch (ILI9341 / 2.2″ / 240 * 320)
Availability:
In stock
- Compatible with the 3.3/5V operation voltage level.
- It comes with an SD card socket.
- Features Backlight Control Circuit
- SPI Serial bus-only require 4 IO least
35,800 Ks
In stock
ILI9341 is a 262144-color single-chip SOC driver for a TFT liquid crystal display with a resolution of 240×320 dots (RGB), comprising a 720-channel source driver, a 320-channel gate driver, 172800 bytes GRAM for graphic display data of 240×320 dots (RGB), and power supply circuit.
ILI9341 supports parallel 8-/9-/16-/18-bit data bus MCU interface, 6-/16-/18-bit data bus RGB interface, and 3-/4-line serial peripheral interface (SPI).
The moving picture area can be specified in internal GRAM by window address function.
The specified window area can be updated selectively so that moving pictures can be displayed simultaneously independent of the still picture area.
ILI9341 can operate with 1.65V ~ 3.3V I/O interface voltage and an incorporated voltage follower circuit to generate voltage levels for driving an LCD.
ILI9341 supports full color, 8-color display mode, and sleep mode for precise power control by software and these features make the ILI9341 an ideal LCD driver for medium or small size portable products such as digital cellular phones, smartphone, MP3, and PMP where long battery life is a major concern.
| Input Voltage (V) | 3.3 to 5 |
| Driver IC | ILI9341 |
| Pixel Resolution | 240 x 320 |
| Output | 720 source outputs 320 gate outputs Common electrode output (VCOM) |
| Display mode: | Full color mode (Idle mode OFF): 262K-color Reduced color mode (Idle mode ON): 8-color |
| Operating Temperature (°C) | -40 to 85 |
| Length (mm) | 65 |
| Width (mm) | 40 |
| Height (mm) | 10 |
| Weight (gm) | 20 |
| Shipment Weight | 0.022 kg |
| Shipment Dimensions | 9 × 9 × 3 cm |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, Relay Module
1 Channel Relay Module (5V,10A)
45 in stock- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: EAP-000013 - Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
8 in stock- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-000011 - Electronic Parts, Module
DS3231 RTC Module
1 in stock- Weight: 8g
- Operating voltage :3.3 – 5 .5 V
- Clock chip: high-precision clock chip DS3231
- Clock Accuracy :0-40 ℃ range, the accuracy 2ppm, the error was about 1 minute
- Calendar alarm clock with two
- Programmable square-wave output
- Real time clock generator seconds, minutes, hours, day, date, month and year timing and provide valid until the year 2100 leap year compensation
- Chip temperature sensor comes with an accuracy of ± 3 ℃
- Memory chips: AT24C32 (storage capacity 32K)
- I2C bus interface, the maximum transmission speed of 400KHz (working voltage of 5V)
SKU: EAP-000006
There are no reviews yet.