No products in the cart.
Electrical, Electrical & Mechanical, Electronic Parts, Motor
NEMA17 Stepper Motor (17HS4401)
Availability:
In stock
- Frame Size: 42 x 42mm (1.7 inch x 1.7 inch)
- Body Length: 40mm
- Shaft Diameter: 5mm
- Number of Wire Leads: 4
- Wire Length: 400mm
- Weight: 280g
- Temperature rise: 80deg Max(rated current, 2 phase on)
20,300 Ks
In stock
Stepper motor is a motor that moves in discrete steps, one step at a time. It is generally used in a variety of applications where precise position control is desirable such as 3D printer, laser cutter and pick & place machine. This NEMA 17HS4401 bipolar stepper motor has a 1.8º step angle (200 steps/revolution) with 40N.cm (56oz.in) holding torque.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
3 in stock- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-000011 - Electronic Parts, Module, Detection & Sensor Module
MFRC-522 RFID Reader Module
7 in stock- RC522 Features
- 13.56MHz RFID module
- Operating voltage: 2.5V to 3.3V
- Communication : SPI, I2C protocol, UART
- Maximum Data Rate: 10Mbps
- Read Range: 5cm
- Current Consumption: 13-26mA
- Power down mode consumption: 10uA (min)
SKU: EAP-000005 - Electronic Parts, Module, LCD Display Module
20×4 Character LCD Display Module (Blue)
3 in stock- LCD display module with blue backlight
- It can display 4-lines * 20-characters
- Small and light appearance, it is easy and convenient to use
- Suitbale for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc
SKU: EAP-000016 - Development Board, Electronic Parts, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
In StockDevelopment Board, Electronic Parts, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
3 in stock- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-000607
There are no reviews yet.