No products in the cart.
Component, DIY Items, Electronic Parts, Switch, Button & Connector, Trending Items
Slide Switch ( SPDT, 3Pin )
Availability:
In stock
- Model No: SS12F15G5
- Position: 2; Pin: 3
- Rated value: DC 250 V, 0.5 A
- Insulation resistance: > 100 MZ
- Minimum load: DC 500 V
- Dielectric strength: AC 500 V/1 minute
- Mechanical life: 100,000 times
300 Ks
In stock
- Toggle switch: The DIY slide switch is a relatively simple structure.
- This is a switch that changes the operating state (on, off) of the contact by turning the control lever.
- It has a wide range of applications, stable performance and easy to use.
Features:
- By turning the handle of the switch to turn the circuit on or off, so as to achieve the purpose of switching the circuit
- Various instruments and equipment, all kinds of electric toys, fax machines, audio equipment, medical equipment, beauty equipment and other electronic products
- Generally used in low voltage circuits, with flexible cursor movements, stable and reliable performance
- Pin grid size: 3 mm; rated value: DC 250 V, 0.5 A; Insulation resistance: > 100 MZ; Minimum load: DC 500 V; Dielectric strength: AC 500 V/1 minute
| Weight | 0.001 kg |
|---|---|
| Dimensions | 2 × 0.5 × 1.3 cm |
- Model No: SS12F15G5.
- Position: 2; Pin: 3 poles
- Material: Plastic,Metal
- Pin grid size: 3 mm
- Rated value: DC 250 V, 0.5 A
- Insulation resistance: > 100 MZ
- Minimum load: DC 500 V
- Dielectric strength: AC 500 V/1 minute.
- Mechanical life: 100,000 times
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, OLED Display Module
0.91 OLED Display Module (Blue)
75 in stock- 0.91 inch I2C/IIC 128×32 OLED Display Module
- Work perfectly well without the need of back light.
- 128*32 high resolution, ultra wide viewing angle
- The display is self-illuminating
- Power requirement is low
- Fully compatible with multiple controlling chips including Arduino and more.
- Better performance characteristics than traditional LCD and LED displays.
SKU: EAP-000020 - Detection & Sensor Module, Electronic Parts, Module
HTU21D Temperature and Humidity Sensor Module
Stock outDetection & Sensor Module, Electronic Parts, ModuleHTU21D Temperature and Humidity Sensor Module
Out of stock- ​Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10k resistors to limit 5V signals
- Only one HTU21D sensor can reside on the I2C bus at a time
SKU: EAP-000002 - DIY Items, Electronic Parts, Module, Relay Module
1 Channel Relay Module (5V,10A)
18 in stock- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: EAP-000013 - Electronic Parts, Module, OLED Display Module
TM1637 Clock Display Module
46 in stock- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
- The counter project using 7 segment display.
- 4 M2 screws positioning holes for easy installation
SKU: EAP-000007
There are no reviews yet.