PCB Terminal Block (5.08mm Pitch, 300V, 10A)
Component, Electronic Parts
PCB Terminal Block (5.08mm Pitch, 300V, 10A)
SKU: N/A
Availability:
In stock
PCB Terminal Block (5.08mm Pitch, 300V, 10A)
100 Ks – 200 Ks
Pin | 2, 3, 4 |
---|
Based on 0 reviews
0.0 overall
0
0
0
0
0
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, OLED Display Module
0.96 OLED Display Module (128×64) (Blue)
3 in stockRated 5.00 out of 5(1)- Work perfectly well without the need of back light.
- 128*64 high resolution, ultra wide viewing angle
- Super low power consumption–only 0.08W when the whole screen lights up and 0.06W when displaying characters
- Fully compatible with multiple controlling chips including Arduino and more.
- Support a wide range of voltage input
SKU: EAP-0000199,900 Ks - Electronic Parts, Module, LCD Display Module
16×2 LCD Display Module + I2C Expander Module
in stock0 out of 5(0)- Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
- I2C adapter allows flexibility in connections
- I2C Reduces the overall wirings
- 16 characters wide, 2 rows
- White text on the green background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
SKU: n/a6,000 Ks - Electronic Parts, Module, Relay Module
1 Channel Relay Module (5V,10A)
45 in stock0 out of 5(0)- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: EAP-0000132,800 Ks - Electronic Parts, Module, Detection & Sensor Module
MFRC-522 RFID Reader Module
7 in stock0 out of 5(0)- RC522 Features
- 13.56MHz RFID module
- Operating voltage: 2.5V to 3.3V
- Communication : SPI, I2C protocol, UART
- Maximum Data Rate: 10Mbps
- Read Range: 5cm
- Current Consumption: 13-26mA
- Power down mode consumption: 10uA (min)
SKU: EAP-0000055,100 Ks
There are no reviews yet.