No products in the cart.
Electronic Parts, Component, Switch, Button & Connector
Push Button with Cap (12x12x7.3 mm)
Availability:
In stock
- Type: Keys Tactile Switch
- Material: plastic
- Color: green, blue, red, white, yellow
- Switch size: approx. 12*12*7.3mm
- Pin: 4 pins
- Durable in use.
400 Ks
- Little click switches are standard input “buttons” on electronic projects.
- These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial.
- The pins are normally open (disconnected) and when the button is pressed they are momentarily closed.
| Color | Blue, Green, Red, White, Yellow |
|---|
- Operating Voltage: 12 V DC
- Operating Current: 50mA
- On/Off Function: Push to ON
- Switch Type: Momentary
- Mounting Type: Through-hole
- Contact Material: Aluminum alloy
- Contact Resistance: 50mΩ
- Insulation Resistance: 100MΩ
- Operating Temperature Range: -20°C to +70°C
- Operation Force: About 3-5N
- Operation Stroke: 1.05mm
- Body Material: Plastic
- Mech. & Electrical Life: 300,000 Cycles
- Protection Grade: IP65
- Length (mm): 12
- Width (mm): 12
- Height (mm): 7.3
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, LCD Display Module
20×4 LCD Display Module + I2C Expander Module
in stock- 2004 204 20X4 Character LCD Display Module Blue Backlight
- Blue & Green backlight
- Fully assembled and tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
SKU: n/a - Electronic Parts, Module, Relay Module
2 Channel Relay Module (5V,10A)
25 in stock- Switching mains loads
- Home automation
- Battery backup
- High current load switching
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
SKU: EAP-000012 - Electronic Parts, Component, Switch, Button & Connector
Round Cap for Square tactile Switch (12x12x7.3 mm)
In StockElectronic Parts, Component, Switch, Button & ConnectorRound Cap for Square tactile Switch (12x12x7.3 mm)
in stock- Easy to install, good quality for long time use
- Great replacement for the old or broken buttons cap on the tactile switch
- Fits on a 12 x 12 x 7.3 mm tactile push button switch.
- Contact resistance: 50m Max (initial)
- Insulation resistance: 100 M min DC (250 V)
- Color: blue, green, red and black
SKU: n/a
There are no reviews yet.