Single/Double Row Header
Component, Electronic Parts
Single/Double Row Header
SKU: N/A
Availability:
In stock
Single/Double Row Header
90 Ks – 1,500 Ks
Pin | 40 Pin, 15 Pin |
---|---|
Choose | Single Straight, Single Curve, Double Straight, Double Curve |
Type | Male, Female |
Color | Red, Blue, Green, Yellow, Black |
Based on 0 reviews
0.0 overall
0
0
0
0
0
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, LCD Display Module
16×2 Character LCD Display Module + I2C Expander Module (Green)
In StockElectronic Parts, Module, LCD Display Module16×2 Character LCD Display Module + I2C Expander Module (Green)
1 in stock0 out of 5(0)- Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
- I2C adapter allows flexibility in connections
- I2C Reduces the overall wirings
- 16 characters wide, 2 rows
- White text on the green background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
SKU: EAP-0000177,000 Ks - Electronic Parts, Module, LCD Display Module
20×4 Character LCD Display Module + I2C Expander Module (Blue)
In StockElectronic Parts, Module, LCD Display Module20×4 Character LCD Display Module + I2C Expander Module (Blue)
2 in stock0 out of 5(0)- 2004 204 20X4 Character LCD Display Module Blue Backlight
- Blue backlight
- Fully assembled and tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
SKU: EAP-00001515,000 Ks - Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
10 in stock0 out of 5(0)- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-0000116,000 Ks - Electronic Parts, Module, Detection & Sensor Module
Raindrop Detection Sensor Module
15 in stock0 out of 5(0)- The LM393, use of the wide voltage comparator
- Provide both digital and analog output
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- The sensor uses the high-quality FR – 04 double material, the large area of 5.5*4.0 CM
- Treatment of nickel plating and surface, have fight oxidation, electrical conductivity, and life has more superior performance
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15mA
- With potentiometer sensitivity adjustment
- The output format: digital switch output (0 and 1) and analog AO voltage output;
- Has a fixed bolt hole, convenient installation
SKU: EAP-0000011,600 Ks
There are no reviews yet.