Voltage Regulator
Component, Electronic Parts, Integrated Circuits(ICs)
Voltage Regulator IC
SKU: N/A
Availability:
In stock
Voltage Regulator
500 Ks – 600 Ks
Part No | IC (L7805), IC (L7809), IC (L7812 ) |
---|
Based on 0 reviews
0.0 overall
0
0
0
0
0
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Development Board, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
In StockElectronic Parts, Development Board, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
5 in stock0 out of 5(0)- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-00060719,800 Ks - Electronic Parts, Module, LCD Display Module
16×2 Character LCD Display Module (Green)
6 in stock0 out of 5(0)- Brand new and high quality
- LCD display module with green blacklight
- Wide viewing angle and high contrast
- Built-in industry standard HD44780 equivalent LCD controller
- Commonly
- used in: copiers, fax machines, laser printers, industrial test
- equipment, networking equipment such as routers and storage devices
- LCM type: Characters
- Can display 2-lines X 16-characters
- Operate with 5V DC
SKU: EAP-0000184,600 Ks - Electronic Parts, Module, Detection & Sensor Module
MFRC-522 RFID Reader Module
out of stock0 out of 5(0)- RC522 Features
- 13.56MHz RFID module
- Operating voltage: 2.5V to 3.3V
- Communication : SPI, I2C protocol, UART
- Maximum Data Rate: 10Mbps
- Read Range: 5cm
- Current Consumption: 13-26mA
- Power down mode consumption: 10uA (min)
SKU: EAP-0000054,500 Ks - Electronic Parts, Module, Relay Module
2 Channel Relay Module (5V,10A)
14 in stock0 out of 5(0)- Switching mains loads
- Home automation
- Battery backup
- High current load switching
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
SKU: EAP-0000123,200 Ks
There are no reviews yet.