No products in the cart.
Detection & Sensor Module, Electronic Parts, Module
GY-68 BMP180 Barometric Sensor Module
Availability:
In stock
- 1.8V to 3.6V Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Maximum I2C speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Completely calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
4,300 Ks
In stock
- Measuring the absolute pressure of the environment using a digital barometer like this one has some interesting applications. By converting the measured pressure into altitude, you have a reliable sensor to determine the height of your robot, plane.
- Using a sensor as capable as the BMP180 you can achieve 1m accuracy, with noise of just 17cm in ultra high resolution noise. The device will operate at just 0.3uA, meaning low current consumption for battery-powered applications.
- The BMP180 comes fully calibrated and ready to use. Since the device operates over I2C, we have added optional I2C pull ups that can be activated using the PU (pull up) jumper on the board for your convenience and ease during breadboarding.
- Using I2C, the device provides pressure and temperature as 16bit values, which are used together with calibration data within the device to provide a temperature compensated altitude calculation.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Development Board, Electronic Parts, STM
STM32F103C8T6 ARM Development Board
8 in stock- 100% Brand new and high-quality STM32 Board
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
- Reset(POR/PDR).
- 4-16MHz crystal.
- Onboard Mini USB interface, you can give the board power supply and USB communication.
SKU: EAP-000021 - DIY Items, Electronic Parts, Module, Relay Module
1 Channel Relay Module (5V,10A)
18 in stock- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: EAP-000013 - Electronic Parts, Module, OLED Display Module
0.91 OLED Display Module (Blue)
75 in stock- 0.91 inch I2C/IIC 128×32 OLED Display Module
- Work perfectly well without the need of back light.
- 128*32 high resolution, ultra wide viewing angle
- The display is self-illuminating
- Power requirement is low
- Fully compatible with multiple controlling chips including Arduino and more.
- Better performance characteristics than traditional LCD and LED displays.
SKU: EAP-000020 - DIY Items, Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
3 in stock- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-000011
There are no reviews yet.