, ,

Plastic Water Solenoid Valve (12V)

SKU: EAP-001212

In stock

  • Plastic Water Electric Solenoid Valve Normally Closed Water Inlet Flow Switch for use with water, air, ect.
  • Plastic Water Solenoid Valve used in automatic control system: solar automatic water supply, infrared induction ware, water dispenser, water control machine, automatic water dispenser, water heater, campus card equipment, etc.

11,500 Ks

In stock

  •  The water solenoid valve selects the corresponding voltage and temperature according to the actual situation when selecting type.
  • When install the solenoid valve, medium flow direction must be consistent with the direction arrow as shown in the valve body, the valve must be installed in horizontal pipe runs. Solenoid valve coil keep in a vertical position, the valve can not be put in places with splashing water or water leakage.
  • If the solenoid valve is closed or blocked, please open the top four screws to clean the inner impurities.
  • During use solenoid valve should be regularly cleaning dirt on the surface of the movable iron core and the piston, sealing gasket should be checked at the same time in dismounting, damaged should be replaced timely when found.
SKU: EAP-001212 Categories: , ,
  • Color : White
  • Material: Plastic,Metal
  • Voltage :12V
  • Connector Angle :180 Degree
  • Solenoid Valve Type : Normally Closed
  • Working pressure: 0.02~0.8mpa (3~114 psi)
  • Operating temperature: 0~90 Degree Celsius
  • Total Size : 84mm x 43mm x 57mm (LxWxH)
  • Weight : 93g

Based on 0 reviews

0.0 overall

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.