No products in the cart.
Battery, Component, Electronic Parts
9V Rechargeable Battery (1100mAh, 4.07Wh, Type C)
Availability:
Out of stock
The 9V Rechargeable Battery (1100mAh, 4.07Wh, USB Type-C) is a convenient rechargeable replacement for standard 9V batteries. It features a built-in USB Type-C charging port, allowing direct charging with a Type-C cable without requiring an external battery charger.
18,100 Ks
Out of stock
Features
- Rechargeable 9V lithium battery
- Built-in USB Type-C charging port
- 1100mAh high-capacity design for longer runtime
- No external battery charger required
- Low self-discharge for extended storage life
- Built-in protection against overcharging, over-discharging, and short circuits
- Lightweight and portable
- Environmentally friendly alternative to disposable 9V batteries
- Suitable for DIY electronics, Arduino projects, multimeters, smoke detectors, wireless microphones, guitar pedals, and other 9V-powered devices.
- Battery Type: Rechargeable Lithium Battery
- Nominal Voltage: 9V DC
- Operating Voltage: 9V
- Capacity: 1100mAh
- Energy: 4.07Wh
- Charging Port: USB Type-C
- Rechargeable: Yes
- Chemistry: Lithium-ion
- Protection: Built-in overcharge, over-discharge & short-circuit protection
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- DIY Items, Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
3 in stock- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-000011 - Detection & Sensor Module, Electronic Parts, Module
DHT11 Temperature and Humidity Sensor Module
In StockDetection & Sensor Module, Electronic Parts, ModuleDHT11 Temperature and Humidity Sensor Module
386 in stock- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation)
- Temperature measuring range: 0~+50degree
- Humidity measurement accuracy: ±5.0%RH
- Temperature measurement accuracy: ±2.0degree
- Power Supply： 3.3~5.5V DC
- Output： 4 pin single row
- Interchangeability： Fully Interchangeable
- Long-Term Stability： <±1%RH/year
SKU: EAP-000003 - Development Board, Electronic Parts, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
Stock outDevelopment Board, Electronic Parts, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
Out of stock- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-000607 - DIY Items, Electronic Parts, Module, Relay Module
2 Channel Relay Module (5V,10A)
8 in stock- Switching mains loads
- Home automation
- Battery backup
- High current load switching
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
SKU: EAP-000012
There are no reviews yet.