No products in the cart.
Electronic Parts, Module
IR Optocoupler Module
Availability:
In stock
- Use imported groove coupler sensor
- groove width 5 mm.
- The indicator lamp is off, the output is high, the output is low.
- Obscured, high output; unobstructed, low output
- Clean signal comparator output, good waveform, more than 15mA driving capability.
- Voltage 3.3 V – 5 V
- Output format: digital switching output (0 and 1)
- Fixed bolt holes for easy installation
1,100 Ks
In stock
- . The module is unobstructed, when the receiver is turned on, the module DO output is low, while, DO output is high;
- 2. It can be connected to the relay module, DO component limiting function, the buzzer may also be connected to the active module contains alarm.
- Use imported groove coupler sensor
- groove width 5 mm.
- The indicator lamp is off, the output is high, the output is low.
- Obscured, high output; unobstructed, low output
- Clean signal comparator output, good waveform, more than 15mA driving capability.
- Voltage 3.3 V – 5 V
- Output format: digital switching output (0 and 1)
- Fixed bolt holes for easy installation
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, Detection & Sensor Module
DHT11 Temperature and Humidity Sensor Module
In StockElectronic Parts, Module, Detection & Sensor ModuleDHT11 Temperature and Humidity Sensor Module
14 in stock- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation)
- Temperature measuring range: 0~+50degree
- Humidity measurement accuracy: ±5.0%RH
- Temperature measurement accuracy: ±2.0degree
- Power Supply： 3.3~5.5V DC
- Output： 4 pin single row
- Interchangeability： Fully Interchangeable
- Long-Term Stability： <±1%RH/year
SKU: EAP-000003 - Electronic Parts, Module, OLED Display Module
0.96 OLED Display Module (128×64) (Blue)
1 in stock- Work perfectly well without the need of back light.
- 128*64 high resolution, ultra wide viewing angle
- Super low power consumption–only 0.08W when the whole screen lights up and 0.06W when displaying characters
- Fully compatible with multiple controlling chips including Arduino and more.
- Support a wide range of voltage input
SKU: EAP-000019 - Electronic Parts, Module, Relay Module
8 Channel Relay Module (5V,10A)
8 in stockDC or AC signal, control, you can control the 220V AC load;
There is a normally open and one normally close contact;
The module is compliant with international safety standards, control and load areas isolation trenches.SKU: EAP-000010 - Electronic Parts, Module, LCD Display Module
128×64 Graphic LCD Display Module (Blue)
3 in stock- Built-in Controller (ST7920)
- +5V Power Supply
- 1/64 Duty Cycle
- Built-in Blue Backlight
- 12864 LCD Display Module 128×64 Dots Graphic Blue Color Backlight
- LCD display module with blue backlight.
- Small and light appearance, it is easy and convenient to use.
- Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
SKU: EAP-000014
There are no reviews yet.