XD-42 5V/3.3V Dual Channel Solderless Breadboard Power Supply Module This Small and compact XD-42 5V/3.3V Dual Channel Solderless Breadboard Power Supply Module can make your project easy and portable and you will not need to carry bulky power supplies with you. The module comes with a series diode, polarity reversal protection. The two-channel module can take DC 7V to 12V input through DC (Black ) Jack and can produce 3.3V and +5V on each separate channel. The module is having an onboard Mini USB port to take input to the module. It also has an indicator LED to show power On/Off status and Voltage switching (between 3.3v or 5V ) button for switching the output voltage on the breadboard on both channels. It is a must-have product in your DIY kit for experimenters who have to test/prototype electronic circuits on a breadboard. This is a power supply module for the standard breadboard. Its concave design will not waste your proto zone. This breadboard power shield supports a Mini USB power supply and power jack 7-12V supply. There are two independent power optional: 5V/3.3V. With this board, you can send power to both power lanes of the breadboard, and each side has an on/off switch. This product is known as Power Supply 2 Channel 3.3V 5V XD-42 Breadboard Power Supply Module For MB-102 & Mini Breadboard, Power supply 3.3V-5V for printed circuit XD-42, MB102 Solderless Power Supply Module PCB Breadboard 5V, 3.3V.
Electronic Parts, Power Supply Module
XD-42 Breadboard Power Supply Module (3.3V, 5V)
SKU: EAP-000839
Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)
Availability:
In stock
- Will produce 5V & 3.5V when 12 V DC is applied
- Input Voltage : 6.5-12V (DC)
- Maximum Output Current: < 700ma
- Can be switched to 0V, 3.3V, 5V
3,000 Ks
In stock
Based on 1 review
5.0 overall
1
0
0
0
0
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, Detection & Sensor Module
HCSR04 Ultrasonic Sensor Module
3 in stockRated 5.00 out of 5(1)- Sensor Type: Ultrasonic
- Output: Digital Sensor
- Voltage: 5VDC
- Detection distance: 2cm-400cm (0.02M – 4.0M)
- Static current: < 2mA
- Level output: high-5V
- High precision: up to 0.3cm
SKU: EAP-0000042,700 Ks - Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
8 in stock0 out of 5(0)- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-0000116,350 Ks - Electronic Parts, Module, Detection & Sensor Module
HTU21D Temperature and Humidity Sensor Module
In StockElectronic Parts, Module, Detection & Sensor ModuleHTU21D Temperature and Humidity Sensor Module
13 in stock0 out of 5(0)- Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10k resistors to limit 5V signals
- Only one HTU21D sensor can reside on the I2C bus at a time
SKU: EAP-0000027,500 Ks - Electronic Parts, Development Board, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
In StockElectronic Parts, Development Board, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
6 in stock0 out of 5(0)- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-00060718,000 Ks
Ivan Saw Naing (verified owner) –
ဒီ module power input က DC Jack အပြင် mini USB port လည်းပါတာကြောင့် အသုံးပြူရတာ ပိုအဆင်ပြေပါတယ်
Ivan Saw Naing –