No products in the cart.
Electronic Parts, Module, Power Supply Module
HIECUBE Dual Power Supply (5V/12V, 36W)
Availability:
In stock
- Input voltage: 85-265VAC / 100-370VDC
- Output voltage, Vout1: 5V DC
- Output voltage, Vout2: 12V DC
- Output current, Vout1: 0.5A
- Output current, Vout2: 3.0A
- Power Max: 5W
- Output voltage accuracy: ± 1%
- Size (L x W x H): 48 * 36 * 23mm.
36,000 Ks
In stock
HD0512P36SR is a professional AC-DC converter with rugged design, using good quality components for precise stable voltage and output power, very suitable for Circuit boards using Microcontrollers. , Sensors, Relay,…to fulfill a multitude of different applications.
- Input voltage: 85-265VAC / 100-370VDC
- Output voltage, Vout1: 5V DC
- Output voltage, Vout2: 12V DC
- Output current, Vout1: 0.5A
- Output current, Vout2: 3.0A
- Power Max: 5W
- Output voltage accuracy: ± 1%
- Size (L x W x H): 48 * 36 * 23mm.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, OLED Display Module
TM1637 Clock Display Module
24 in stock- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
- The counter project using 7 segment display.
- 4 M2 screws positioning holes for easy installation
SKU: EAP-000007 - Electronic Parts, Module, Detection & Sensor Module
HTU21D Temperature and Humidity Sensor Module
In StockElectronic Parts, Module, Detection & Sensor ModuleHTU21D Temperature and Humidity Sensor Module
13 in stock- Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10k resistors to limit 5V signals
- Only one HTU21D sensor can reside on the I2C bus at a time
SKU: EAP-000002 - Electronic Parts, Development Board, ESPRESSIF(ESP)
ESP32 Development Board with 1.14 Inch LCD
In StockElectronic Parts, Development Board, ESPRESSIF(ESP)ESP32 Development Board with 1.14 Inch LCD
2 in stock- Wi-Fi Mode Station/SoftAP/SoftAP+Station/P2P
- Security mechanism WPA/WPA2/WPA2-Enterprise/WPS
- Encryption Type AES/RSA/ECC/SHA
- Firmware upgrade UART download/OTA（Through network/host to download and write firmware）
- Software Development Support cloud server development /SDK for user firmware development
- Networking protocol IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT
- User Configuration AT + Instruction set, cloud server, android/iOSapp
- OS FreeRTOS
SKU: EAP-000022 - Electronic Parts, Module, Relay Module
1 Channel Relay Module (5V,10A)
45 in stock- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: EAP-000013
There are no reviews yet.