No products in the cart.
All Products
Showing 829–864 of 883 results
- Detection & Sensor Module, Electronic Parts, Module
HTU21D Temperature and Humidity Sensor Module
Stock outDetection & Sensor Module, Electronic Parts, ModuleHTU21D Temperature and Humidity Sensor Module
Out of stock- Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10k resistors to limit 5V signals
- Only one HTU21D sensor can reside on the I2C bus at a time
SKU: EAP-000002 - Electronic Parts, Module
I2C Expander Module
27 in stock- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
SKU: EAP-000114 - Consumer Products, Dehumidifier, Home Appliances, Industrial Equipment & Materials, Machinery & Accessories, Potable Dehumidifier
Industrial Dehumidifier (Dongxin*DX-8138D)
DiscontinuedStock outConsumer Products, Dehumidifier, Home Appliances, Industrial Equipment & Materials, Machinery & Accessories, Potable DehumidifierIndustrial Dehumidifier (Dongxin*DX-8138D)
Out of stock- Modular design, easy maintenance, low failure rate
- High power dehumidification, high efficiency, fast speed
- Intelligent humidity control, dehumidification will be automatically operated when the set value is exceeded, and automatic standby will be performed when the set value is reached
- Real-time display of temperature and humidity on LED display
- Power off memory function, three-minute delay protection function
- Automatic cream at low temperature
- 1-24 hours timing switch, once set, the whole year without manual duty, worry and effort
- Automatic fault detection and code display, convenient maintenance and repair
Commercial dehumidifier is widely used in valuables warehouse, pharmaceutical, food, electronics, leather, footwear, furniture, printing, chemical, tobacco and many other industries
SKU: MCA-000010 - Consumer Products, Dehumidifier, Home Appliances, Industrial Equipment & Materials, Machinery & Accessories, Potable Dehumidifier
Industrial Dehumidifier (TOJJE*DJ-1681E)
DiscontinuedStock outConsumer Products, Dehumidifier, Home Appliances, Industrial Equipment & Materials, Machinery & Accessories, Potable DehumidifierIndustrial Dehumidifier (TOJJE*DJ-1681E)
Out of stock- 1 Year Warranty & After sales service(2 times)
- World famous brand compressor with safety protection, 3 minutes delay protection
- Humidity control range 40%-95%RH
- Eco-friendly refrigerant R410a/R22/R407c/R134a
- Rs485 socket with Modbus protocol connection
- Automatic power on/off according to ambient humidity
- Timed on/off setting with memory function
- Continously drainage by external soft tube
- Automatic defrosting
- High efficiency, energy saving
SKU: MCA-000009 - Electronic Parts, Module
IR Optocoupler Module
7 in stock- Use imported groove coupler sensor
- groove width 5 mm.
- The indicator lamp is off, the output is high, the output is low.
- Obscured, high output; unobstructed, low output
- Clean signal comparator output, good waveform, more than 15mA driving capability.
- Voltage 3.3 V – 5 V
- Output format: digital switching output (0 and 1)
- Fixed bolt holes for easy installation
SKU: EAP-000104 - Electronic Parts, Module
IR Receiver Module
112 in stock- Can detect a flame or in a 760 nanometer wavelength of ~ 1100 nm range of the light, lighter flame test distance of 80cm, for the greater flame, the farther the distance test
- The detection angle of 60 degrees or so, particularly sensitive to the flame spectrum
- Sensitivity adjustable (shown in blue digital potentiometer adjustment)
- the comparator output signal clean, good waveform, driving ability, more than 15mA
- With adjustable precision potentiometer sensitivity adjustment
- The working voltage of 3.3V-5V
- The output format: DO digital switching outputs (0 and 1) and AO analog voltage output
- A fixed bolt holes for easy installation
SKU: EAP-000108 - Electronic Parts, Module, Motor Driver Module
IRF520 MOSFET Driver Module
6 in stock- Voltage: 3.3 – 5V.
- Ports: Digital Level.
- Output load voltage: 0-24 V.
- Output load current: <5A (1A above need to add heat sink).
- Platform: Arduino, MCU, ARM, raspberry pi.
- Using original IRF520 Power MOS, you can adjust the output PWM
SKU: EAP-000120 - Electronic Parts, Module
MAX7219 Dot Matrix LED Display Module (1×1)
19 in stock- Requires only 3 communication wires of MCU
- Pre-cascaded MAX7219 Dot Matrix LED Module.
- The overall size of the display is very compact
- The PCB features M3 holes for mounting.
- Module with input and output interfaces
- Support for cascading multiple modules
- Quite large display
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Input Voltage: 3.7 to 5.3 V
SKU: EAP-000124 - Electronic Parts, Module
MAX7219 Dot Matrix LED Display Module (1×4)
Out of stock- Requires only 3 communication wires of MCU
- Pre-cascaded MAX7219 Dot Matrix LED Module.
- The overall size of the display is very compact
- The PCB features M3 holes for mounting.
- Module with input and output interfaces
- Support for cascading multiple modules
- Quite large display
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Input Voltage: 3.7 to 5.3 V
SKU: EAP-000125 - Electronic Parts, Module
MAX7219 Dot Matrix LED Display Module (2×2)
Out of stock- Requires only 3 communication wires of MCU
- Pre-cascaded MAX7219 Dot Matrix LED Module.
- The overall size of the display is very compact
- The PCB features M3 holes for mounting.
- Module with input and output interfaces
- Support for cascading multiple modules
- Quite large display
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Input Voltage: 3.7 to 5.3 V
SKU: EAP-000126 - Detection & Sensor Module, Electronic Parts, Module
MFRC-522 RFID Reader Module
109 in stock- RC522 Features
- 13.56MHz RFID module
- Operating voltage: 2.5V to 3.3V
- Communication : SPI, I2C protocol, UART
- Maximum Data Rate: 10Mbps
- Read Range: 5cm
- Current Consumption: 13-26mA
- Power down mode consumption: 10uA (min)
SKU: EAP-000005 - Cutter, DIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Trending Items
Micro-Shear Precision Flush Cutter (Xuron 170-II)
In StockCutter, DIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Trending ItemsMicro-Shear Precision Flush Cutter (Xuron 170-II)
27 in stockOverall Length: 5 inches (127 mm)
Cutting Capacity: 18 AWG (1 mm) soft wire
Rockwell Hardness: 54-56 Rc
Type of Cut: Flush
Note: Not for use on hardened wireSKU: EQT-000013 - Adhesive, Cleanroom Product, ESD Supplies, Industrial Equipment & Materials
Powde’les Finger Cots (Cut Type)
Stock outAdhesive, Cleanroom Product, ESD Supplies, Industrial Equipment & MaterialsPowde’les Finger Cots (Cut Type)
- Powde’les finger cots are manufactured from 100% natural rubber latex
- These finger cots are very low powdered content for clean environment purpose
- Prevention of contamination caused by direct contact from fingers
- Use for electronic, mechatronic, optronic industries
- Size: S / M / L
SKU: n/a - DIY Items, Electrical & Mechanical, Equipment & Instruments, Trending Items
Precision Screwdriver Set (32 in 1)
In StockDIY Items, Electrical & Mechanical, Equipment & Instruments, Trending ItemsPrecision Screwdriver Set (32 in 1)
1 in stock- This 32-in-1 screwdriver set is made of sturdy, high-hardness materials, comes in a self-contained tool box
- It is ideal for precision repairs for small electronics, small machinery, and personal devices.
- The bits are magnetized for maximum ease of use, and the non-slip handle makes for easy use.
- Great for watches, eyeglasses, cell phones, tablets and more.
SKU: EQT-000005 - Electronic Parts, Module, Motor Driver Module
PWM MOSFET Driver Module (15A, 400W)
Out of stock- Operating Voltage (VDC): 5 ~ 36V
- Peak Current (A): 30A
- Continuous Current (A) : 15A
- No. of Channels: 1
- Battery Protection Mode: No
- Operating temperature: -40 ~ +85
- Cooling Fan: No
- Arduino Shield: No- can be used with Wire connection
- Speed Control: Yes
- Polarity Protection: NO
SKU: EAP-000130 - Detection & Sensor Module, Electronic Parts, Module
Raindrop Detection Sensor Module
423 in stock- The LM393, use of the wide voltage comparator
- Provide both digital and analog output
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- The sensor uses the high-quality FR – 04 double material, the large area of 5.5*4.0 CM
- Treatment of nickel plating and surface, have fight oxidation, electrical conductivity, and life has more superior performance
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15mA
- With potentiometer sensitivity adjustment
- The output format: digital switch output (0 and 1) and analog AO voltage output;
- Has a fixed bolt hole, convenient installation
SKU: EAP-000001 - Component, Diode, Electronic Parts
Rectifier Diode x 10Pcs
- A rectifier is an electrical device used to convert alternating current (AC) into direct current (DC) by allowing a current to flow through the device in one direction only.
- Diodes work like one-way valves within the rectifier to maintain this flow of current.
SKU: n/a - Electrical & Mechanical, Electronic Parts, Motor, Trending Items
SG90 Micro Servo Motor
The TowerPro SG90 servo motor is one of the most popular servo motors at the moment. This servo motor has a torque of up to 1.56 kg * cm, with which all kinds of sensors, cameras or even small robots can easily be moved.
SKU: n/a - Electronic Parts, Module, Wireless Module
SIM900A GSM Module
2 in stock- Dual-Band 900/ 1800 MHz
- GPRS multi-slot class 10/8GPRS mobile station class B
- Compliant to GSM phase 2/2+
- Dimensions: 24*24*3 mm
- Weight: 3.4g
- Control via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands)
- Supply voltage range : 5V
- Low power consumption: 1.5mA (sleep mode)
- Operation temperature: -40°C to +85 °
SKU: EAP-000106 - Electronic Parts, Module
SMD Soldering Training Board
9 in stock- After welding, just connect electricity (3-12V) to see the effect. You can quickly judge the welding effect. The welding product is a beautiful water lamp circuit.
- The back of the board with mm/Inch ruler, Easy to measure component
- It’s DIY Kits, Blue Led. This is a perfect Soldering skills training materials for beginners
- High quality PCB, has clearly marked the electronics components, even beginners can easily solder successfully.
SKU: EAP-000133 - Detection & Sensor Module, Electronic Parts, Module
Soil Moisture Sensor Module
224 in stock- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
- Operating Voltage: 3.3V~5V
SKU: EAP-000103
