No products in the cart.
All Products
Showing 757–792 of 883 results
- Component, DIY Items, Electrical & Mechanical, Electronic Parts, Sensors, Sensors, Trending Items
Water Level Float Switch Sensor (Small)
In StockComponent, DIY Items, Electrical & Mechanical, Electronic Parts, Sensors, Sensors, Trending ItemsWater Level Float Switch Sensor (Small)
203 in stockSimple to use water level sensor
Dry contact output, act like a switch, or reed switch.
Fully conceal, submerge-able
Liquid or water level detector
Model No. : ZP4510
Max Contact Rating : 10W
Max Switching Voltage : 220V DC/AC
Max Switching Current : 0.5A
Max Breakdown Voltage : 300V DC/AC
Max Carry Current : 1A
Max Contact Resistance : 100m ohmSKU: EAP-000067 - Detection & Sensor Module, Electronic Parts, Module
Water Quality Sensor Module (TDS Meter v1.0)
Stock outDetection & Sensor Module, Electronic Parts, ModuleWater Quality Sensor Module (TDS Meter v1.0)
Out of stock- Input voltage: 3.3~5.5V
- Output signal: 0~2.3V
- Working current: 3~6mA
- TDS measurement range: 0~1000ppm
- TDS measurement accuracy: ±10% F.S. (25°C)
- Size: 42*32mm
- Module interface: XH2.54-3P
- Electrode interface: XH2.54-2P
SKU: EAP-000992 - Electronic Parts, Module, Wireless Module
WIFI Transceiver Wireless Module ESP8266 (ESP-01)
31 in stock- SDIO 2.0, SPI, UART 32-pin QFN package
- Integrated RF switch, blain, 24dBm PA, DCXO, and PMU
- Integrated RISC processor, on-chip memory and external memory interfaces
- Integrated /baseband processors
- Quality of Service management
- I2S interface for high fidelity audio applications
- On-chip low-dropout linear regulators for all internal supplies
- Proprietary spurious-free clock generation architecture
- Integrated WEP, TKIP, AES, and WAPI engines
SKU: EAP-000596 - Component, DIY Items, Electrical & Mechanical, Electronic Parts, Switch, Button & Connector, Switch, Button & Connector, Trending Items
Wire Connector CH-2/ CH-3
In StockComponent, DIY Items, Electrical & Mechanical, Electronic Parts, Switch, Button & Connector, Switch, Button & Connector, Trending ItemsWire Connector CH-2/ CH-3
CH2 Wire Connector
- Type: 2Pin Connector
- Color : White
- Rated Voltage & Current & Watt : 250V/ 2A/ 100W
- Size : 19mm*17mm*13mm
CH3 Wire Connector
- Type: 3Pin Connector
- Color : White
- Rated Voltage & Current & Watt :220V/ 1-2A/ 200W
- Size : 19mm*27mm*13mm
SKU: n/a - Electronic Parts, Module, Wireless Module
Wireless Charger Receiver Module (5W, 5V)
DiscontinuedStock outElectronic Parts, Module, Wireless ModuleWireless Charger Receiver Module (5W, 5V)
Out of stock- Model: Wireless Charger Receiver Module
- Input Power: 5V 1A
- Output: 5W
- Charging Efficiency: 75%
- Transmission distance: 2-8mm
- Charger Applicable Form: Wireless Charger
- Executive Standard: Qi Wireless Charging Standard
SKU: EAP-000743 - Consumer Products, IT Products, Wireless Network Device
Wireless USB WiFi Adapter
- Interface : USB2.0
- Frequency : 2.4GHz
- Wireless Transmitter Power : 18dBm(MAXEIRP)
- Transmission Rate : 150Mbps/300Mbps/600Mbps
- WD-1513B wireless USB network card is suitable for wireless connection of desktop PC and other devices. It can provide convenient and fast wireless network mode.
- The network card has its own drive U disk, which supports the installation and drive of non-CD, and avoids the trouble of CD-ROM.
- Following the standards of 802.11b, 802.11g and 802.11n.
- Supporting WPA, WPA2 advanced security mechanism, TKIP, AES, WEP encryption, can provide security for wireless network connection.
- Support Operating System : Windows XP/Vista/Win 7/Win 8/Win 8.1/Win 10
SKU: n/a - Battery Charging Module, DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
XH-M240 18650 Li-ion Battery Capacity Tester
In StockBattery Charging Module, DIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsXH-M240 18650 Li-ion Battery Capacity Tester
4 in stock- Model: XH-M240
- Display accuracy: 0.1
- Measurement accuracy: 1mAH
- Power supply: DC 5V-12V/18650 battery (Not included)
- Standby current: 5-7mA
- Discharge current: About 500mA
- Load power: 10W, 8Ω
- Installation hole: 3mm
SKU: EAP-001022 - Battery Charging Module, DIY Items, Electronic Parts, Module, Trending Items
XH-M603 Charging Control Module With LED Display (Input DC 10-30V, 20A, Direct Output)
In StockBattery Charging Module, DIY Items, Electronic Parts, Module, Trending ItemsXH-M603 Charging Control Module With LED Display (Input DC 10-30V, 20A, Direct Output)
10 in stock- Model:XH-M603
- Input Voltage: DC 10-30V
- Current: 20A
- Display Precision:0.1V
- Control Precision:0.1V
- Output Type: direct output
SKU: EAP-000845 - DIY Items, Electronic Parts, Module, Trending Items
XL4016 Step Down Converter Module (4~40Vin, 300W, 10A)
In StockDIY Items, Electronic Parts, Module, Trending ItemsXL4016 Step Down Converter Module (4~40Vin, 300W, 10A)
27 in stock- Maximum Power Output: 300W
- Maximum Current Supply: 10A
- Input Voltage Range: 4~40V
- Output Voltage Range: 1.2V to 35V
- Step Down (Buck) Converter
- Adjustable Output Voltage
- Adjustable Output Current
SKU: EAP-001289 - DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
XL6009 DC-DC Step-up Adjustable Power Supply Module
In StockDIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsXL6009 DC-DC Step-up Adjustable Power Supply Module
186 in stock- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v
SKU: EAP-000762 - DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
XL6009 DC-DC Step-up/down (Boost-Buck) Adjustable Power Supply Module
In StockDIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsXL6009 DC-DC Step-up/down (Boost-Buck) Adjustable Power Supply Module
95 in stock- Automatic Buck Boost Converter
- Output Current: 4A
- Switching Frequency: 400 Khz
- Input Voltage: 3.8V to 32V
- Output Voltage: 1.25V to 35V
- Conversion Efficiency: <94%
- Non Isolated Buck Boost Converter
- Dimensions: 48 x 25 x 14mm (L x W x H)
Applications:
- Solar Cell
- Car Regulator
- Wind Power
SKU: EAP-001086 - Component, DIY Items, Electronic Parts, Switch, Button & Connector, Trending Items
XT60 Connector
In StockComponent, DIY Items, Electronic Parts, Switch, Button & Connector, Trending ItemsXT60 Connector
- Current Rating: 60A continuous, with a peak current of 100A.
- Contact Material: Gold-plated brass for optimal conductivity and corrosion resistance.
- Wire Gauge: Supports cables from 12AWG to 10AWG, depending on the variant.
- Mating Cycles: Rated for 1000 mating cycles, ensuring long-term reliability.
- Contact Resistance: Less than 5 mΩ.
- Voltage Rating: Generally rated for 500V DC
SKU: n/a - DIY Items, Electronic Parts, Module, Timer Module, Trending Items
XY-J02 Timer Module (DC 6~30V, 400W, 0.1s~999mins)
In StockDIY Items, Electronic Parts, Module, Timer Module, Trending ItemsXY-J02 Timer Module (DC 6~30V, 400W, 0.1s~999mins)
52 in stock- Working voltage: 6–30V supports micro USB 5.0V power supply.
- Trigger signal source: High level triggering (3.0V – 24V) signal does not improve the system’s anti jamming capability with the system.
- Output capability: Equipment that can control DC 30V 5A or less than 220v5A.
- Static curren: 20mA working current: 50mA
- Service life: Greater than 100 thousand times
- Working temperature: -40 to 85 C;
- Size: 6.2*3.8*1.7cm
- Time range: 0.1 second (min) ~999 min (max) continuous tunable
With optocoupler isolation, enhance anti-interference ability, industrial grade circuit boards, set parameters after power failure forever
SKU: EAP-001035 - Electronic Parts, Module
YP-05 FTDI FT232L USB to TTL Converter Module
4 in stock- Chip: FT232RL. Draw out all signal port of FT232RL chip. Standard interface, compatible with a variety of official Arduino controller
- RXD / TXD transceiver communication indicator
- USB power supply, can choose 5V or 3.3V, set by jumper
- With over current protection, using 500mA self-restore fuse. Pin definition: DTR, RXD, TX, VCC, CTS, GND
- Pitch: 2.54mm.
- Size: 36 x 18mm (L x W)
- Interface: Mini USB
SKU: EAP-001168 - Detection & Sensor Module, Electronic Parts, Module
ZMPT101B AC Voltage Sensor Module
29 in stock- Output Signal: Analog 0-5V
- Operating Voltage: DC 5V-30V
- Measure within 250V AC
- Rated input current: 2mA
- Onboard micro-precision voltage transformer
- Analog output corresponding quantity can be adjusted
- Good consistency for voltage and power measurement
- Active output single-phase AC voltage sensor module
SKU: EAP-000978 - Electrical & Mechanical, Equipment & Instruments, Tools
ZY-204 Breadboard (1660 Points)
Out of stock- Three terminal: 2520 jacks
- Floor: Black Aluminum plate
- Dielectric: FR-1
- Distribution Strips, Tie-point 400
- Binding Posts
- Blister Card
- Phosphor bronze plating spring clip
- Matching jumper, the diameter of 0.8mm
- Plastic parts: ABS
SKU: EAP-000374 - Electronic Parts, Module, OLED Display Module
0.91 OLED Display Module (Blue)
75 in stock- 0.91 inch I2C/IIC 128×32 OLED Display Module
- Work perfectly well without the need of back light.
- 128*32 high resolution, ultra wide viewing angle
- The display is self-illuminating
- Power requirement is low
- Fully compatible with multiple controlling chips including Arduino and more.
- Better performance characteristics than traditional LCD and LED displays.
SKU: EAP-000020 - Development Board, Electronic Parts, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
Stock outDevelopment Board, Electronic Parts, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
Out of stock- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-000607 - Electronic Parts, Module, OLED Display Module
0.91 OLED Display Module (White)
40 in stock0.91″ min OLED display screen with 128X32 resolution and SSD1306 chipset
Standard IIC serial communication interface pinout compatible with most MCU development board such as Arduinos, Raspberry Pi,C51 series etc.SKU: EAP-000060 - Electronic Parts, Module, OLED Display Module
0.96 OLED Display Module (128×64) (Blue)
Out of stock- Work perfectly well without the need of back light.
- 128*64 high resolution, ultra wide viewing angle
- Super low power consumption–only 0.08W when the whole screen lights up and 0.06W when displaying characters
- Fully compatible with multiple controlling chips including Arduino and more.
- Support a wide range of voltage input
SKU: EAP-000019 - DIY Items, Electronic Parts, Module, Relay Module
1 Channel Relay Module (5V,10A)
18 in stock- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: EAP-000013 - Electronic Parts, LCD Display Module, Module
128×64 Graphic LCD Display Module (Blue)
4 in stock- Built-in Controller (ST7920)
- +5V Power Supply
- 1/64 Duty Cycle
- Built-in Blue Backlight
- 12864 LCD Display Module 128×64 Dots Graphic Blue Color Backlight
- LCD display module with blue backlight.
- Small and light appearance, it is easy and convenient to use.
- Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
SKU: EAP-000014 - Electronic Parts, LCD Display Module, Module
16×2 Character LCD Display Module
- Show control information (on, off, elapsed time), temperature, time, or numbers/special characters
- Access all custom characters stored in ROM
- Debugging for microcontroller projects
- Useful in dark and bright environments
SKU: n/a - Electronic Parts, LCD Display Module, Module
16×2 LCD Display Module + I2C Expander Module
- Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
- I2C adapter allows flexibility in connections
- I2C Reduces the overall wirings
- 16 characters wide, 2 rows
- White text on the green background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
SKU: n/a
