No products in the cart.
All Products
Showing 865–883 of 883 results
- DIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, Industrial Equipment & Materials
Soldering Iron Sponge
In StockDIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, Industrial Equipment & MaterialsSoldering Iron Sponge
Spare sponge for use with soldering iron stands.
Packed of quality soldering iron sponge
Ideal to replace old worn out sponge.
Can also be used with temperature controlled soldering iron system.SKU: n/a - Detection & Sensor Module, Electronic Parts, Module
Sound Detection Sensor Module
117 in stock- Material : plastic
- Size: approx. 32mm*17mm*15mm(length*width*height)
- Main Chip: LM393, Electret condenser microphone
- Working Voltage: DC 4-6V
- Color: Blue
- Note: The Maximum induction distance is 0.5M
SKU: EAP-000102 - Electronic Parts, LCD Display Module, Module
SPI TFT Display Module with Touch (ILI9341 / 2.4″ / 240*320)
In StockElectronic Parts, LCD Display Module, ModuleSPI TFT Display Module with Touch (ILI9341 / 2.4″ / 240*320)
9 in stock- It is a 2.4″ SPI TFT LCD Screen Module
- 10pins interface.
- Not just an LCD break but include SD card slot,
- The LCD drive ic is ILI9341.
- It’s a 240 * 320 (resolution),
- 2.4 inch TFT LCD screen.
- The LCD has a wide viewing angle, the contrast is also very suitable.
- The display interface is serial, it just needs 5 wires (CS, RS, SCL, SDA, RST) for controlling.
- SDcard use hardware SPI interface (CS / MOSI / MISO / SCK), Not solder pins.
SKU: EAP-000080 - Development Board, Electronic Parts, STM
STM32F103C8T6 ARM Development Board
8 in stock- 100% Brand new and high-quality STM32 Board
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
- Reset(POR/PDR).
- 4-16MHz crystal.
- Onboard Mini USB interface, you can give the board power supply and USB communication.
SKU: EAP-000021 - Electronic Parts, Module, OLED Display Module
TM1637 Clock Display Module
46 in stock- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
- The counter project using 7 segment display.
- 4 M2 screws positioning holes for easy installation
SKU: EAP-000007 - Detection & Sensor Module, Electronic Parts, Module
Touch Sensor Module (1 Channel)
1 in stock- Model: TTP223B
- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode) : 60 mS
- Response time (low power mode) : 220 mS
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
SKU: EAP-000101 - Battery Charging Module, DIY Items, Electronic Parts, Module, Trending Items
TP4056 Lithium Battery Charging Module(Micro)
In StockBattery Charging Module, DIY Items, Electronic Parts, Module, Trending ItemsTP4056 Lithium Battery Charging Module(Micro)
41 in stock- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
SKU: EAP-000116 - Detection & Sensor Module, Electronic Parts, Module
VL53L0x Time of Flight Module (ToF)
28 in stockFeatures
• Fully integrated miniature module
– 940nm Laser VCSEL
– VCSEL driver
– Ranging sensor with advanced embedded micro controller
– 4.4 x 2.4 x 1.0mm
• Fast, accurate distance ranging
– Measures absolute range up to 2m
– Reported range is independent of the target reflectance
– Operates in high infrared ambient light levels
– Advanced embedded optical cross-talk compensation to simplify cover glass selection
• Eye safe
– Class 1 laser device compliant with latest standard IEC 60825-1:2014 – 3rd edition
• Easy integration
– Single reflowable component
– No additional optics
– Single power supply
– I2C interface for device control and data transfer
– Xshutdown (Reset) and interrupt GPIO
– Programmable I2C addressSKU: EAP-000070 - DIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Tools, Tools, Trending Items
Wire Crimping Tools (TUOSEN, 11390)
In StockDIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Tools, Tools, Trending ItemsWire Crimping Tools (TUOSEN, 11390)
10 in stockSpecial suitable for cut wire, electronic feet, trimming plastic products, cut a small metal wire, and so on.
Style: 11390
Handle material: PPR
Clamp head material; 65 manganese steel
Pliers handle length: 110mm
Stripping diameter; 20-260mm
Full length: 165mm
Handle length: 95mm
Cutting edge length: 40mm
Stripping range: 0.6-2.6mmSKU: EQT-000015 - Detection & Sensor Module, Electronic Parts, Module
YS-27 Hall Sensor Module
21 in stock- YS-27 Hall Sensor Module
- Signal output indicator
- Analog / Digital output
- VCC : 2.3 volts to 5.3 Volts
- GND : power supply ground
- AOUT (analog sensor output) : Arduino/ MCU input
- DOUT (digital sensor output) : Arduino/MCU input
SKU: EAP-000121 - Electronic Parts, Module
YX5300 Mp3 Music Player Module
Out of stock- Voice Broadcasting of Vehicle Navigation
- Highway transportation inspection and toll station voice prompt
- Voice prompts for safety inspection of railway stations and bus stations
- Voice prompt of electric power, communication and financial business hall
- Verify the voice prompt in and out of the vehicle passage
- Voice prompt of frontier inspection channel of public security
- Voice notice for safe driving of electric sightseeing car
- Automatic alarm of mechanical and electrical equipment failure
- Fire sound alarm prompt
- Support sampling frequency (kHz):8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48
- Support file format:MP3/WAV
- Support Micro SD card, Micro SDHC Card
- 30 class adjustable volume
- UART TTL serial control playback mode, baud rate is 9600bps
- Power supply can be 3.2 ~ 5.2VDC
- Size:43mm x 25mm
SKU: EAP-000008
