No products in the cart.
Component, Electronic Parts, PCB Circuit Board
Solderable Breadboard
Availability:
In stock
- Solderable Breadboard (5x10cm)
- Solderable Breadboard (7x9cm)
- Solderable Breadboard (4.7×11.6cm)
Price range: 3,500 Ks through 5,100 Ks
| Size | 5x10cm, 7x9cm, 4.7×11.6cm |
|---|
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Detection & Sensor Module, Electronic Parts, Module
DHT11 Temperature and Humidity Sensor Module
In StockDetection & Sensor Module, Electronic Parts, ModuleDHT11 Temperature and Humidity Sensor Module
386 in stock- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation)
- Temperature measuring range: 0~+50degree
- Humidity measurement accuracy: ±5.0%RH
- Temperature measurement accuracy: ±2.0degree
- Power Supply： 3.3~5.5V DC
- Output： 4 pin single row
- Interchangeability： Fully Interchangeable
- Long-Term Stability： <±1%RH/year
SKU: EAP-000003 - Detection & Sensor Module, Electronic Parts, Module
HTU21D Temperature and Humidity Sensor Module
Stock outDetection & Sensor Module, Electronic Parts, ModuleHTU21D Temperature and Humidity Sensor Module
Out of stock- ​Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10k resistors to limit 5V signals
- Only one HTU21D sensor can reside on the I2C bus at a time
SKU: EAP-000002 - Development Board, Electronic Parts, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
Stock outDevelopment Board, Electronic Parts, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
Out of stock- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-000607 - Detection & Sensor Module, Electronic Parts, Module
Raindrop Detection Sensor Module
423 in stock- The LM393, use of the wide voltage comparator
- Provide both digital and analog output
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- The sensor uses the high-quality FR – 04 double material, the large area of 5.5*4.0 CM
- Treatment of nickel plating and surface, have fight oxidation, electrical conductivity, and life has more superior performance
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15mA
- With potentiometer sensitivity adjustment
- The output format: digital switch output (0 and 1) and analog AO voltage output;
- Has a fixed bolt hole, convenient installation
SKU: EAP-000001
There are no reviews yet.