No products in the cart.
Component, DIY Items, Electrical & Mechanical, Electronic Parts, Switch, Button & Connector, Switch, Button & Connector, Trending Items
Limit Switch
Availability:
Out of stock
- Model No.: V-156-1C25
- Rated Current: 15A
- AC Rating: 125–250VAC
- DC Rating: 0.6A @ 125VDC
- DC Rating: 0.3A @ 250VDC
1,900 Ks
Out of stock
The V-156-1C25 Micro Limit Switch is a mechanical snap-action switch equipped with a long lever and roller actuator. It is designed to detect the position, movement, or end-of-travel of mechanical parts in automation and control systems.
The roller lever reduces friction during operation and makes the switch suitable for moving mechanisms, sliding parts, doors, CNC machines, 3D printers, and industrial equipment.
Features
- SPDT contact configuration with COM, NO and NC terminals
- Long metal lever with roller actuator
- Fast and reliable snap-action switching
- Suitable for both AC and DC switching applications
- High current rating up to 15A
- Roller design reduces mechanical friction and wear
- Two mounting holes for easy installation
- Compact and durable construction
- Can be used for position sensing and end-stop detection
- Suitable for industrial, automation and DIY projects
- Model: V-156-1C25
- Switch Type: Micro/ Limit Switch
- Contact Configuration: SPDT
- Terminals: COM, NO, NC
- Number of Terminals: 3
- Actuator Type: Long Lever with Roller
- Rated Current: 15A
- AC Rating: 125–250VAC
- Motor Rating: 1/2HP
- DC Rating: 0.6A @ 125VDC
- DC Rating: 0.3A @ 250VDC
- Terminal Type: Flat Blade Terminals
- Lever Material: Metal
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module
DS3231 RTC Module
Out of stock- Weight: 8g
- Operating voltage :3.3 – 5 .5 V
- Clock chip: high-precision clock chip DS3231
- Clock Accuracy :0-40 ℃ range, the accuracy 2ppm, the error was about 1 minute
- Calendar alarm clock with two
- Programmable square-wave output
- Real time clock generator seconds, minutes, hours, day, date, month and year timing and provide valid until the year 2100 leap year compensation
- Chip temperature sensor comes with an accuracy of ± 3 ℃
- Memory chips: AT24C32 (storage capacity 32K)
- I2C bus interface, the maximum transmission speed of 400KHz (working voltage of 5V)
SKU: EAP-000006 - Development Board, Electronic Parts, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
Stock outDevelopment Board, Electronic Parts, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
Out of stock- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-000607 - DIY Items, Electronic Parts, Module, Relay Module
1 Channel Relay Module (5V,10A)
18 in stock- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: EAP-000013
There are no reviews yet.