No products in the cart.
Electronic Parts
Showing 253–288 of 628 results
- Battery, Component, Electronic Parts
LISUN ER14250 Lithium Battery
Out of stock- Type: ER14250
- Nominal capacity (at 0.5mAh -2V): 1200mAh
- Nominal voltage:3.6V
- Max constant current: 30mA
- Max Pulse current: 100mA
- Operating temperature range: -55ºC~+85ºC
- Place of Origin: Wuhan, China (Mainland)
- Certificate:CE,ROHS,UN38.3 REACH
- Size:14.5(D) x 25.0(H)mm
SKU: EAP-000670 - Electronic Parts, Sensors
LJ12A3-4-Z/BX Inductive Proximity Sensor (5~36V, NPN)
39 in stock- Output Type: NPN-NO
- Red LED checks the state of the proximity sensor
- High repeated positioning accuracy
- High switching frequency
- Wide voltage range
- Antivibration, dust, water and oil prevention
- Reverse power protection, short circuit protection, directly connecting with PLC
- Can replace small switches and limit switches
SKU: EAP-000414 - Component, Electronic Parts
LM2574 Voltage Regulator IC
13 in stock- 3.3V, 5V, 12V, and adjustable output versions
- Adjustable version output 1.23V to 37V ±4% Max. over Line and Load conditions.
- Guaranteed 0.5A output current
- Wide input voltage, up to 40V
- Thermal shutdown and current limit protection
- Requires only 4 external components.
- Shutdown capability (standby mode)
- Low power standby mode < 200µA typical
- High efficiency
- 52kHz fixed frequency internal oscillator
SKU: EAP-000735 - DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
LM2596S DC-DC Step-down Adjustable Power Supply Module
In StockDIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsLM2596S DC-DC Step-down Adjustable Power Supply Module
20 in stock- Model:LM2596S
- Input voltage: 4-32V
- Output Voltage: 1.5-30V (adjustable)
- Output current: rated current 2A, maximum 3A (heat sink required)
- Conversion efficiency: Up to 92% (the higher the voltage, the higher the efficiency)
- Switching Frequency: 150KHz
- Rectifier: Non-Synchronous Rectification
- Module Properties: Non-isolated step-down module (buck)
- Short circuit protection: current limiting
- Operating temperature: Industrial grade (-40 ℃ to +85 ℃) (output power 10W or less)
- Full load temperature rise: 40 ℃
- Load regulation: ± 0.5%
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Output ripple:
- Input 12V Output 5V 3A 60mV (MAX)
- Input 24V Output 12V 3A 120mV (MAX)
- Input way: IN+, IN-
- Output way: OUT+, OUT-
SKU: EAP-000508 - Component, Electronic Parts, Integrated Circuits(ICs)
LM317T Adjustable Voltage Regulator IC (TO-220)
In StockComponent, Electronic Parts, Integrated Circuits(ICs)LM317T Adjustable Voltage Regulator IC (TO-220)
4 in stock- Output voltage range: 1.2 to 37 V
- Output current in excess of 1.5 A
- 0.1 % line and load regulation
- Floating operation for high voltages
- Complete series of protections: current limiting, thermal shutdown and SOA control
SKU: EAP-000919 - Electronic Parts, Module
Load Cell Weight Sensor (HX711, 5kg)
Out of stockThe Load Cell Weight Sensor (HX711, 5kg) is a precision weighing kit designed for electronic scales, force measurement, and weight detection applications. It includes a 5kg aluminum load cell sensor, an HX711 24-bit analog-to-digital converter (ADC) amplifier module. The HX711 module amplifies the tiny signal generated by the load cell and converts it into digital data, making it easy to interface with Arduino, ESP32, ESP8266, Raspberry Pi, STM32, and other microcontrollers.
SKU: EAP-001407 - Electronic Parts, Module
Matrix Keypad Membrane Switch
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 12 DC
SKU: n/a - Electronic Parts, Module
MAX30100 Pulse Oximeter and Heart Rate Sensor Module
54 in stock- Operating Voltage – 1.8V to 3.3V
- Input Current – 20mA
- Integrated Ambient Light Cancellation
- High Sample Rate Capability
- Fast Data Output Capability
Applications:
- Medical Oxygen measurement devices
- Wearable Devices
- Fitness Assistant systems
SKU: EAP-001057 - Detection & Sensor Module, Electronic Parts, Module, Trending Items
MAX30102 Heart Rate and Pulse Oximeter Module
Stock outDetection & Sensor Module, Electronic Parts, Module, Trending ItemsMAX30102 Heart Rate and Pulse Oximeter Module
Out of stockThe MAX30102 Heart Rate and Pulse Oximeter Module is a high-performance biometric sensor designed to measure heart rate (HR) and blood oxygen saturation (SpOâ‚‚). It integrates red and infrared LEDs, a photodetector, optical components, and low-noise analog signal processing into a compact module. With an I2C interface, it can be easily connected to Arduino, ESP32, STM32, Raspberry Pi, and other microcontrollers for health monitoring and wearable applications.
SKU: EAP-001403 - Electronic Parts, Module
MAX7219 Dot Matrix LED Display Module (1×8)
3 in stock- Requires only 3 communication wires of MCU
- Pre-cascaded MAX7219 Dot Matrix LED Module.
- The overall size of the display is very compact
- The PCB features M3 holes for mounting.
- Module with input and output interfaces
- Support for cascading multiple modules
- Quite large display
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Input Voltage: 3.7 to 5.3 V
SKU: EAP-000127 - Electronic Parts, Module
MAX7219 Dot Matrix LED Display Module (2×8)
1 in stock- Requires only 3 communication wires of MCU
- Pre-cascaded MAX7219 Dot Matrix LED Module.
- The overall size of the display is very compact
- The PCB features M3 holes for mounting.
- Module with input and output interfaces
- Support for cascading multiple modules
- Quite large display
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Input Voltage: 3.7 to 5.3 V
SKU: EAP-000128 - Cable Wire and Connector, Component, DIY Items, Electronic Parts, Trending Items
MC4 Solar Cable Connectors
In StockCable Wire and Connector, Component, DIY Items, Electronic Parts, Trending ItemsMC4 Solar Cable Connectors
- Connector Type : Male and female MC4 connectors
- Compatibility : Compatible with 4–6 mm² (12–10 AWG) solar cables
- Voltage : 1000 V DC
- Current : 30 A
- Weather Resistance : IP67 or higher, suitable for outdoor use in harsh environments
- Applications : Solar PV panels, solar power systems, and renewable energy projects
SKU: n/a - Electronic Parts, LCD Display Module, Module
MCP23017 16-bit I2C Port Expander Module
8 in stockThe MCP23017 16-bit I2C Port Expander Module expands the GPIO capability of your microcontroller by adding 16 programmable digital input/output pins through the I2C interface. The module is widely used to control HD44780 Character LCDs (16×2, 20×4), 128×64 Graphic LCDs (Parallel Interface). It is ideal for Arduino, ESP32, STM32, Raspberry Pi, and other embedded systems where additional GPIO pins are required. The module supports configurable pull-up resistors, interrupt outputs, and adjustable I2C addresses for connecting multiple devices on the same bus.
SKU: EAP-001398 - Component, Detection & Sensor Module, Electrical, Electrical & Mechanical, Electronic Parts, Module, Sensors, Sensors
MD-PS002 Pressure Sensor
In StockComponent, Detection & Sensor Module, Electrical, Electrical & Mechanical, Electronic Parts, Module, Sensors, SensorsMD-PS002 Pressure Sensor
1 in stock-   The chip surface coating protection against water vapor, dust and other chip;
-   Pressure connection stainless steel, pressure;
-   Pin-defined, easy connection;
-   A variety of range to choose from.
- Â Size6.8*6.8*4.6mm
-  Zero output  ± 8 mV / v /  ± 10 mV / v
-   Full scale output 65-115 mV / 75-125 mV / 170-280 mV
-   Linearity of ± 0.20% FSO / ± 0.25% FSO
-   Hysteresis and repeatability of ± 0.10% FSO
-   Zero temperature coefficient of ± 30 μv / v / ° C
-   Resistance temperature coefficient of 0.30% / ° C
-   Sensitivity temperature coefficient of -0.20% FSO /  ° C
-   Zero Thermal Hysteresis ± 0.10% FSO
-   Long-term stability of ± 0.20% FSO
SKU: EAP-000732
