No products in the cart.
Development Board, Electronic Parts, Raspberry Pi, Trending Items 
Raspberry Pi 4 Model B (4GB)
Availability:
In stock
The Raspberry Pi 4B 4GB supports dual 4K displays through its micro-HDMI ports, making it perfect for high-definition video and creative endeavours. It has dual-band WiFi 2.4 GHz and 5.0 GHz IEEE 802.11ac, Bluetooth 5.0, and Gigabit Ethernet for a consistent connection.
895,000 Ks
In stock
Dual displays 4K output
We’ve listened to your feedback: with Raspberry Pi 4, you can run two monitors at once — and in 4K, too!
Your new desktop computer
The speed and performance of the new Raspberry Pi 4 is a step up from earlier models. For the first time, we’ve built a complete desktop experience. Whether you’re editing documents, browsing the web with a bunch of tabs open, juggling spreadsheets or drafting a presentation, you’ll find the experience smooth and very recognisable — but on a smaller, more energy-efficient and much more cost-effective machine.
Silent, energy-efficient
The fanless, energy-efficient Raspberry Pi runs silently and uses far less power than other computers.
Fast networking
Raspberry Pi 4 comes with Gigabit Ethernet, along with onboard wireless networking and Bluetooth.
USB 3
Your new Raspberry Pi 4 has upgraded USB capacity: along with two USB 2 ports you’ll find two USB 3 ports, which can transfer data up to ten times faster.
| Brands |
|---|
- Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.8GHz
- 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM (depending on model)
- 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
- Gigabit Ethernet
- 2 USB 3.0 ports; 2 USB 2.0 ports.
- Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
- 2 × micro-HDMI® ports (up to 4kp60 supported)
- 2-lane MIPI DSI display port
- 2-lane MIPI CSI camera port
- 4-pole stereo audio and composite video port
- H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
- OpenGL ES 3.1, Vulkan 1.0
- Micro-SD card slot for loading operating system and data storage
- 5V DC via USB-C connector (minimum 3A*)
- 5V DC via GPIO header (minimum 3A*)
- Power over Ethernet (PoE) enabled (requires separate PoE HAT)
- Operating temperature: 0 – 50 degrees C ambient
* A good quality 2.5A power supply can be used if downstream USB peripherals consume less than 500mA in total.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- DIY Items, Electronic Parts, Module, Relay Module
1 Channel Relay Module (5V,10A)
18 in stock- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: EAP-000013 - DIY Items, Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
3 in stock- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-000011 - Development Board, Electronic Parts, ESPRESSIF(ESP)
ESP32 Development Board with 1.14 Inch LCD
Stock outDevelopment Board, Electronic Parts, ESPRESSIF(ESP)ESP32 Development Board with 1.14 Inch LCD
Out of stock- Wi-Fi Mode Station/SoftAP/SoftAP+Station/P2P
- Security mechanism WPA/WPA2/WPA2-Enterprise/WPS
- Encryption Type AES/RSA/ECC/SHA
- Firmware upgrade UART download/OTA（Through network/host to download and write firmware）
- Software Development Support cloud server development /SDK for user firmware development
- Networking protocol IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT
- User Configuration AT + Instruction set, cloud server, android/iOSapp
- OS FreeRTOS
SKU: EAP-000022 - Electronic Parts, LCD Display Module, Module
20×4 LCD Display Module + I2C Expander Module
- 2004 204 20X4 Character LCD Display Module Blue Backlight
- Blue & Green backlight
- Fully assembled and tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
SKU: n/a
There are no reviews yet.