- This product uses excellent heat and moisture resistant materials and has a long service life.
- Straight sliding type, low noise, more convenient.
- Can be used for volume adjustment, image quality and various controls.
- Wide working temperature range ,suitable for various kind of severe environmental.
- The potentiometer is stable and has great performance while using.
Component, Electronic Parts
Slide Potentiometer (B10K)
Availability:
In stock
- Product Name: Sliding Potentiometer
- Resistance Value: 10k Ohm
- Model: SC6080GH
- Adjustment Type: Slide adjustment
- Type: rotary
- Material: Carbon Film
- Body Size: 75 * 9 * 4(mm)
- Total Height: 27 mm/1.06inch
- Parameter: Nominal
- Resistance: 10K
- Rated Power: 0.25 (W)
- Resistance Tolerance: plus-minus 20 (%)
- Sliding Noise: Less Than 68m (V)
- Resolution: 100 (%)
- Zero Resistance: 2 (omega)
- Contact Resistance: 5 (omega)
- Insulation Resistance: 100 (Omega)
3,100 Ks
In stock
- Product Name: Sliding Potentiometer
- Resistance Value: 10k Ohm
- Model: SC6080GH
- Adjustment Type: Slide adjustment
- Type: rotary
- Material: Carbon Film
- Body Size: 75 * 9 * 4(mm)
- Total Height: 27 mm/1.06inch
- Parameter: Nominal
- Resistance: 10K
- Rated Power: 0.25 (W)
- Resistance Tolerance: plus-minus 20 (%)
- Sliding Noise: Less Than 68m (V)
- Resolution: 100 (%)
- Zero Resistance: 2 (omega)
- Contact Resistance: 5 (omega)
- Insulation Resistance: 100 (Omega)
Based on 0 reviews
0.0 overall
0
0
0
0
0
Only logged in customers who have purchased this product may leave a review.
Related products
- Development Board, Electronic Parts, ESPRESSIF(ESP)
ESP32-Cam Development Board
30 in stockRated 5.00 out of 5(1)- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Up to 240MHz, up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRAM
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras with built-in flash
- Support for images WiFI upload
- Support TF card
- Support multiple sleep modes
- Embedded Lwip and FreeRTOS
- Support STA/AP/STA+AP working mode
- Support Smart Config/AirKiss One-click distribution network
- Support for serial local upgrade and remote firmware upgrade (FOTA)
SKU: EAP-000024 - Electronic Parts, LCD Display Module, Module
16×2 LCD Display Module + I2C Expander Module
0 out of 5(0)- Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
- I2C adapter allows flexibility in connections
- I2C Reduces the overall wirings
- 16 characters wide, 2 rows
- White text on the green background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
SKU: n/a14,300 Ks This product has multiple variants. The options may be chosen on the product page - Detection & Sensor Module, Electronic Parts, Module
HTU21D Temperature and Humidity Sensor Module
Stock outDetection & Sensor Module, Electronic Parts, ModuleHTU21D Temperature and Humidity Sensor Module
Out of stock0 out of 5(0)- ​Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10k resistors to limit 5V signals
- Only one HTU21D sensor can reside on the I2C bus at a time
SKU: EAP-000002 - Electronic Parts, LCD Display Module, Module
20×4 LCD Display Module + I2C Expander Module
0 out of 5(0)- 2004 204 20X4 Character LCD Display Module Blue Backlight
- Blue & Green backlight
- Fully assembled and tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
SKU: n/a30,000 Ks This product has multiple variants. The options may be chosen on the product page






There are no reviews yet.