No products in the cart.
Electronic Parts, Component, Resistor
Resistors (1/2 W , 5 Band)
Availability:
In stock
Resistor
350 Ks
Resistor
| Ohm | 51Ω, 100Ω, 150Ω, 200Ω, 300Ω, 330Ω, 470Ω, 560Ω, 1kΩ, 1.5kΩ, 2kΩ, 3kΩ, 3.3kΩ, 4.7kΩ, 5.6kΩ, 10kΩ, 50kΩ, 100kΩ, 150kΩ, 200kΩ, 300kΩ, 330kΩ, 470kΩ, 560kΩ, 1MΩ, 51kΩ, 2.2kΩ, 5.1kΩ, 6.8kΩ, 27kΩ |
|---|
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, Detection & Sensor Module
HTU21D Temperature and Humidity Sensor Module
In StockElectronic Parts, Module, Detection & Sensor ModuleHTU21D Temperature and Humidity Sensor Module
7 in stock- Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10k resistors to limit 5V signals
- Only one HTU21D sensor can reside on the I2C bus at a time
SKU: EAP-000002 - Electronic Parts, Module, LCD Display Module
20×4 LCD Display Module + I2C Expander Module
in stock- 2004 204 20X4 Character LCD Display Module Blue Backlight
- Blue & Green backlight
- Fully assembled and tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
SKU: n/a - Electronic Parts, Module, Relay Module
2 Channel Relay Module (5V,10A)
6 in stock- Switching mains loads
- Home automation
- Battery backup
- High current load switching
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
SKU: EAP-000012
There are no reviews yet.