No products in the cart.
Component, Electronic Parts, Integrated Circuits(ICs)
F1820 Toggle Switch IC
Availability:
Out of stock
F1820 Toggle Switch IC is used as an ON-OFF switch when the micro switch is press which is near the IC in the picture the system may ON when it press again system OFF.
700 Ks
Out of stock
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Development Board, Electronic Parts, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
Stock outDevelopment Board, Electronic Parts, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
Out of stock- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-000607 - Detection & Sensor Module, Electronic Parts, Module
MFRC-522 RFID Reader Module
109 in stock- RC522 Features
- 13.56MHz RFID module
- Operating voltage: 2.5V to 3.3V
- Communication : SPI, I2C protocol, UART
- Maximum Data Rate: 10Mbps
- Read Range: 5cm
- Current Consumption: 13-26mA
- Power down mode consumption: 10uA (min)
SKU: EAP-000005 - Electronic Parts, LCD Display Module, Module
128×64 Graphic LCD Display Module (Blue)
4 in stock- Built-in Controller (ST7920)
- +5V Power Supply
- 1/64 Duty Cycle
- Built-in Blue Backlight
- 12864 LCD Display Module 128×64 Dots Graphic Blue Color Backlight
- LCD display module with blue backlight.
- Small and light appearance, it is easy and convenient to use.
- Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
SKU: EAP-000014 - DIY Items, Electronic Parts, Module, Relay Module
2 Channel Relay Module (5V,10A)
8 in stock- Switching mains loads
- Home automation
- Battery backup
- High current load switching
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
SKU: EAP-000012
There are no reviews yet.