A Shockley diode is a four-layer PNPN semiconductor device that acts as a bistable switch, similar to a thyristor. It consists of alternating P-type and N-type layers, and unlike a thyristor with a gate, it doesn’t have an external gate terminal. Once latched on, it remains on until the current through it drops below a certain threshold, a characteristic shared with other thyristors.
Component, Diode, Electronic Parts
Shocky Diode
Availability:
In stock
Shockley Diode
- SR560 : 60V,5A
- 1N5819 : 40V,1A
- 1N5822 : 40V,3A
600 Ks – 1,000 KsPrice range: 600 Ks through 1,000 Ks
| Part No. | 1N5819, 1N5822, SR560 |
|---|
Based on 0 reviews
0.0 overall
0
0
0
0
0
Only logged in customers who have purchased this product may leave a review.
Related products
- DIY Items, Electronic Parts, Module, Relay Module
2 Channel Relay Module (5V,10A)
8 in stock0 out of 5(0)- Switching mains loads
- Home automation
- Battery backup
- High current load switching
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
SKU: EAP-000012 - Electronic Parts, Module, OLED Display Module
0.91 OLED Display Module (Blue)
75 in stock0 out of 5(0)- 0.91 inch I2C/IIC 128×32 OLED Display Module
- Work perfectly well without the need of back light.
- 128*32 high resolution, ultra wide viewing angle
- The display is self-illuminating
- Power requirement is low
- Fully compatible with multiple controlling chips including Arduino and more.
- Better performance characteristics than traditional LCD and LED displays.
SKU: EAP-000020 - Detection & Sensor Module, Electronic Parts, Module
HTU21D Temperature and Humidity Sensor Module
Stock outDetection & Sensor Module, Electronic Parts, ModuleHTU21D Temperature and Humidity Sensor Module
Out of stock0 out of 5(0)- Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10k resistors to limit 5V signals
- Only one HTU21D sensor can reside on the I2C bus at a time
SKU: EAP-000002 - Development Board, Electronic Parts, ESPRESSIF(ESP)
ESP32 Development Board with SIM800L V1.3
DiscontinuedStock outDevelopment Board, Electronic Parts, ESPRESSIF(ESP)ESP32 Development Board with SIM800L V1.3
Out of stock0 out of 5(0)- Wi-Fi mode: Station/SoftAP/SoftAP+Station/P2P
- Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS
- Encryption type: AES/RSA/ECC/SHA
- Firmware upgrade: UART download/OTA(Through network/host to download and write firmware)
- Software development: Support cloud server development /SDK for user firmware development
- Networking protocol: IPv4、IPv6、SSL、TCP/UDP/HTTP/FTP/MQTT
- User configuration: AT + Instruction set, cloud server, android/iOSapp
- OS: FreeRTOS
SKU: EAP-000023



There are no reviews yet.