A Shockley diode is a four-layer PNPN semiconductor device that acts as a bistable switch, similar to a thyristor. It consists of alternating P-type and N-type layers, and unlike a thyristor with a gate, it doesn’t have an external gate terminal. Once latched on, it remains on until the current through it drops below a certain threshold, a characteristic shared with other thyristors.Â
Component, Diode, Electronic Parts
Shocky Diode
Availability:
In stock
Shockley Diode
- SR560 : 60V,5A
- 1N5819 : 40V,1A
- 1N5822 : 40V,3A
600 Ks – 1,000 KsPrice range: 600 Ks through 1,000 Ks
| Part No. | 1N5819, 1N5822, SR560 |
|---|
Based on 0 reviews
0.0 overall
0
0
0
0
0
Only logged in customers who have purchased this product may leave a review.
Related products
- Detection & Sensor Module, Electronic Parts, Module
MFRC-522 RFID Reader Module
109 in stock0 out of 5(0)- RC522 Features
- 13.56MHz RFID module
- Operating voltage: 2.5V to 3.3V
- Communication : SPI, I2C protocol, UART
- Maximum Data Rate: 10Mbps
- Read Range: 5cm
- Current Consumption: 13-26mA
- Power down mode consumption: 10uA (min)
SKU: EAP-000005 - Electronic Parts, LCD Display Module, Module
20×4 LCD Display Module + I2C Expander Module
0 out of 5(0)- 2004 204 20X4 Character LCD Display Module Blue Backlight
- Blue & Green backlight
- Fully assembled and tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
SKU: n/a30,000 Ks This product has multiple variants. The options may be chosen on the product page - Detection & Sensor Module, Electronic Parts, Module
Raindrop Detection Sensor Module
423 in stock0 out of 5(0)- The LM393, use of the wide voltage comparator
- Provide both digital and analog output
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- The sensor uses the high-quality FR – 04 double material, the large area of 5.5*4.0 CM
- Treatment of nickel plating and surface, have fight oxidation, electrical conductivity, and life has more superior performance
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15mA
- With potentiometer sensitivity adjustment
- The output format: digital switch output (0 and 1) and analog AO voltage output;
- Has a fixed bolt hole, convenient installation
SKU: EAP-000001





There are no reviews yet.