DIY Items
Showing 253–280 of 280 results
- Component, DIY Items, Electrical & Mechanical, Electronic Parts, Sensors, Sensors, Trending Items
Water Level Float Switch Sensor (Small)
In StockComponent, DIY Items, Electrical & Mechanical, Electronic Parts, Sensors, Sensors, Trending ItemsWater Level Float Switch Sensor (Small)
203 in stockSimple to use water level sensor
Dry contact output, act like a switch, or reed switch.
Fully conceal, submerge-able
Liquid or water level detector
Model No. : ZP4510
Max Contact Rating : 10W
Max Switching Voltage : 220V DC/AC
Max Switching Current : 0.5A
Max Breakdown Voltage : 300V DC/AC
Max Carry Current : 1A
Max Contact Resistance : 100m ohmSKU: EAP-000067 - Battery Charging Module, DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
XH-M240 18650 Li-ion Battery Capacity Tester
In StockBattery Charging Module, DIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsXH-M240 18650 Li-ion Battery Capacity Tester
4 in stock- Model: XH-M240
- Display accuracy: 0.1
- Measurement accuracy: 1mAH
- Power supply: DC 5V-12V/18650 battery (Not included)
- Standby current: 5-7mA
- Discharge current: About 500mA
- Load power: 10W, 8Ω
- Installation hole: 3mm
SKU: EAP-001022 - Battery Charging Module, DIY Items, Electronic Parts, Module, Trending Items
XH-M603 Charging Control Module With LED Display (Input DC 10-30V, 20A, Direct Output)
In StockBattery Charging Module, DIY Items, Electronic Parts, Module, Trending ItemsXH-M603 Charging Control Module With LED Display (Input DC 10-30V, 20A, Direct Output)
10 in stock- Model:XH-M603
- Input Voltage: DC 10-30V
- Current: 20A
- Display Precision:0.1V
- Control Precision:0.1V
- Output Type: direct output
SKU: EAP-000845 - DIY Items, Electronic Parts, Module, Trending Items
XL4016 Step Down Converter Module (4~40Vin, 300W, 10A)
In StockDIY Items, Electronic Parts, Module, Trending ItemsXL4016 Step Down Converter Module (4~40Vin, 300W, 10A)
27 in stock- Maximum Power Output: 300W
- Maximum Current Supply: 10A
- Input Voltage Range: 4~40V
- Output Voltage Range: 1.2V to 35V
- Step Down (Buck) Converter
- Adjustable Output Voltage
- Adjustable Output Current
SKU: EAP-001289 - DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
XL6009 DC-DC Step-up Adjustable Power Supply Module
In StockDIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsXL6009 DC-DC Step-up Adjustable Power Supply Module
186 in stock- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v
SKU: EAP-000762 - DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
XL6009 DC-DC Step-up/down (Boost-Buck) Adjustable Power Supply Module
In StockDIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsXL6009 DC-DC Step-up/down (Boost-Buck) Adjustable Power Supply Module
95 in stock- Automatic Buck Boost Converter
- Output Current: 4A
- Switching Frequency: 400 Khz
- Input Voltage: 3.8V to 32V
- Output Voltage: 1.25V to 35V
- Conversion Efficiency: <94%
- Non Isolated Buck Boost Converter
- Dimensions: 48 x 25 x 14mm (L x W x H)
Applications:
- Solar Cell
- Car Regulator
- Wind Power
SKU: EAP-001086 - DIY Items, Electronic Parts, Module, Timer Module, Trending Items
XY-J02 Timer Module (DC 6~30V, 400W, 0.1s~999mins)
In StockDIY Items, Electronic Parts, Module, Timer Module, Trending ItemsXY-J02 Timer Module (DC 6~30V, 400W, 0.1s~999mins)
52 in stock- Working voltage: 6–30V supports micro USB 5.0V power supply.
- Trigger signal source: High level triggering (3.0V – 24V) signal does not improve the system’s anti jamming capability with the system.
- Output capability: Equipment that can control DC 30V 5A or less than 220v5A.
- Static curren: 20mA working current: 50mA
- Service life: Greater than 100 thousand times
- Working temperature: -40 to 85 C;
- Size: 6.2*3.8*1.7cm
- Time range: 0.1 second (min) ~999 min (max) continuous tunable
With optocoupler isolation, enhance anti-interference ability, industrial grade circuit boards, set parameters after power failure forever
SKU: EAP-001035 - DIY Items, Electronic Parts, Module, Relay Module
1 Channel Relay Module (5V,10A)
18 in stock- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: EAP-000013 - DIY Items, Electronic Parts, Module, Relay Module
2 Channel Relay Module (5V,10A)
8 in stock- Switching mains loads
- Home automation
- Battery backup
- High current load switching
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
SKU: EAP-000012 - DIY Items, Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
3 in stock- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-000011 - DIY Items, Electronic Parts, Module, Relay Module
8 Channel Relay Module (5V,10A)
47 in stockDC or AC signal, control, you can control the 220V AC load;
There is a normally open and one normally close contact;
The module is compliant with international safety standards, control and load areas isolation trenches.SKU: EAP-000010 - DIY Items, Electrical & Mechanical, Equipment & Instruments, Multimeter, Trending Items
Digital Multimeter (DT-830B)
In StockDIY Items, Electrical & Mechanical, Equipment & Instruments, Multimeter, Trending ItemsDigital Multimeter (DT-830B)
35 in stock- Model: DT-830B
- Color: Black
- Diode Test: Yes
- hFE Test: Yes
- Low battery indication: Yes
- Auto polarity display: Yes
- Overload Protection: Yes
- DC Voltage: 200mV/2V/20V/200V/1000V
- AC Voltage: 200V/750V
- DC Current: 200uA/2000uA/20mA/200mA/10A
- Resistance: 200 /2K /20K /200K /2000K
- Power: 9V battery (Not included)
- Product Size: 125 X 70 X 25mm
SKU: EQT-000022 - DIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Trending Items
Flush Cutting Pliers (PCAFC-170)
In StockDIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Trending ItemsFlush Cutting Pliers (PCAFC-170)
50 in stockGood quality precision flush cutters. Special suitable for cut wire, electronic feet, trimming plastic products, cut a small metal wire, and so on.
Color: Blue
Material: steel jaw, anti-slip rubber handle.SKU: EQT-000014 - Cutter, DIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Trending Items
Micro-Shear Precision Flush Cutter (Xuron 170-II)
In StockCutter, DIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Trending ItemsMicro-Shear Precision Flush Cutter (Xuron 170-II)
27 in stockOverall Length: 5 inches (127 mm)
Cutting Capacity: 18 AWG (1 mm) soft wire
Rockwell Hardness: 54-56 Rc
Type of Cut: Flush
Note: Not for use on hardened wireSKU: EQT-000013 - DIY Items, Electrical & Mechanical, Equipment & Instruments, Trending Items
Precision Screwdriver Set (32 in 1)
In StockDIY Items, Electrical & Mechanical, Equipment & Instruments, Trending ItemsPrecision Screwdriver Set (32 in 1)
1 in stock- This 32-in-1 screwdriver set is made of sturdy, high-hardness materials, comes in a self-contained tool box
- It is ideal for precision repairs for small electronics, small machinery, and personal devices.
- The bits are magnetized for maximum ease of use, and the non-slip handle makes for easy use.
- Great for watches, eyeglasses, cell phones, tablets and more.
SKU: EQT-000005 - DIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, Industrial Equipment & Materials
Soldering Iron Sponge
In StockDIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, Industrial Equipment & MaterialsSoldering Iron Sponge
Spare sponge for use with soldering iron stands.
Packed of quality soldering iron sponge
Ideal to replace old worn out sponge.
Can also be used with temperature controlled soldering iron system.SKU: n/a - Battery Charging Module, DIY Items, Electronic Parts, Module, Trending Items
TP4056 Lithium Battery Charging Module(Micro)
In StockBattery Charging Module, DIY Items, Electronic Parts, Module, Trending ItemsTP4056 Lithium Battery Charging Module(Micro)
41 in stock- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
SKU: EAP-000116 - DIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Tools, Tools, Trending Items
Wire Crimping Tools (TUOSEN, 11390)
In StockDIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Tools, Tools, Trending ItemsWire Crimping Tools (TUOSEN, 11390)
10 in stockSpecial suitable for cut wire, electronic feet, trimming plastic products, cut a small metal wire, and so on.
Style: 11390
Handle material: PPR
Clamp head material; 65 manganese steel
Pliers handle length: 110mm
Stripping diameter; 20-260mm
Full length: 165mm
Handle length: 95mm
Cutting edge length: 40mm
Stripping range: 0.6-2.6mmSKU: EQT-000015













