No products in the cart.
Battery, Component, Electronic Parts, Power Electronics
9V Battery DC Jack Adapter(length-14cm, socket Jack-5.5×2.1mm)
Availability:
In stock
- Excellent material
- It is an environmental 9V battery buckle
- Convenient for connecting a battery to your application.
- Save power and protect the environment
- Good electrical conductivity and comfortable sense of touch
600 Ks
In stock
The 9v Battery Snap Connector with DC Jack with Battery Connector Cap is widely used for project purposes. The 9V Battery Snap Connector with Power Plug provides the ability to conveniently use a 9V battery to power many common boards and modules such as the popular Arduino and compatible microcontrollers.
This plug is a very common barrel type with an outside diameter of 5.5mm and an inside diameter of 2.1mm. The centre is positive.
- Supply voltage (V): 9
- DC jack Size (mm): 2.1
- Length of Cable (cm): 12
- Length (mm): 160
- Width (mm): 26
- Height (mm): 9
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, Relay Module
2 Channel Relay Module (5V,10A)
7 in stock- Switching mains loads
- Home automation
- Battery backup
- High current load switching
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
SKU: EAP-000012 - Electronic Parts, Module, Detection & Sensor Module
Raindrop Detection Sensor Module
12 in stock- The LM393, use of the wide voltage comparator
- Provide both digital and analog output
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- The sensor uses the high-quality FR – 04 double material, the large area of 5.5*4.0 CM
- Treatment of nickel plating and surface, have fight oxidation, electrical conductivity, and life has more superior performance
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15mA
- With potentiometer sensitivity adjustment
- The output format: digital switch output (0 and 1) and analog AO voltage output;
- Has a fixed bolt hole, convenient installation
SKU: EAP-000001 - Electronic Parts, Module
YX5300 Mp3 Music Player Module
2 in stock- Voice Broadcasting of Vehicle Navigation
- Highway transportation inspection and toll station voice prompt
- Voice prompts for safety inspection of railway stations and bus stations
- Voice prompt of electric power, communication and financial business hall
- Verify the voice prompt in and out of the vehicle passage
- Voice prompt of frontier inspection channel of public security
- Voice notice for safe driving of electric sightseeing car
- Automatic alarm of mechanical and electrical equipment failure
- Fire sound alarm prompt
- Support sampling frequency (kHz):8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48
- Support file format:MP3/WAV
- Support Micro SD card, Micro SDHC Card
- 30 class adjustable volume
- UART TTL serial control playback mode, baud rate is 9600bps
- Power supply can be 3.2 ~ 5.2VDC
- Size:43mm x 25mm
SKU: EAP-000008 - Electronic Parts, Module, Relay Module
1 Channel Relay Module (5V,10A)
11 in stock- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: EAP-000013
There are no reviews yet.