- This product uses excellent heat and moisture resistant materials and has a long service life.
- Straight sliding type, low noise, more convenient.
- Can be used for volume adjustment, image quality and various controls.
- Wide working temperature range ,suitable for various kind of severe environmental.
- The potentiometer is stable and has great performance while using.
Component, Electronic Parts
Slide Potentiometer (B10K)
SKU: EAP-000519
Availability:
In stock
- Product Name: Sliding Potentiometer
- Resistance Value: 10k Ohm
- Model: SC6080GH
- Adjustment Type: Slide adjustment
- Type: rotary
- Material: Carbon Film
- Body Size: 75 * 9 * 4(mm)
- Total Height: 27 mm/1.06inch
- Parameter: Nominal
- Resistance: 10K
- Rated Power: 0.25 (W)
- Resistance Tolerance: plus-minus 20 (%)
- Sliding Noise: Less Than 68m (V)
- Resolution: 100 (%)
- Zero Resistance: 2 (omega)
- Contact Resistance: 5 (omega)
- Insulation Resistance: 100 (Omega)
1,700 Ks
In stock
- Product Name: Sliding Potentiometer
- Resistance Value: 10k Ohm
- Model: SC6080GH
- Adjustment Type: Slide adjustment
- Type: rotary
- Material: Carbon Film
- Body Size: 75 * 9 * 4(mm)
- Total Height: 27 mm/1.06inch
- Parameter: Nominal
- Resistance: 10K
- Rated Power: 0.25 (W)
- Resistance Tolerance: plus-minus 20 (%)
- Sliding Noise: Less Than 68m (V)
- Resolution: 100 (%)
- Zero Resistance: 2 (omega)
- Contact Resistance: 5 (omega)
- Insulation Resistance: 100 (Omega)
Based on 0 reviews
0.0 overall
0
0
0
0
0
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, Relay Module
1 Channel Relay Module (5V,10A)
11 in stock0 out of 5(0)- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: EAP-0000132,500 Ks - Electronic Parts, Development Board, STM
STM32F103C8T6 ARM Development Board
9 in stock0 out of 5(0)- 100% Brand new and high-quality STM32 Board
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
- Reset(POR/PDR).
- 4-16MHz crystal.
- Onboard Mini USB interface, you can give the board power supply and USB communication.
SKU: EAP-00002112,000 Ks - Electronic Parts, Module, LCD Display Module
128×64 Graphic LCD Display Module (Blue)
3 in stock0 out of 5(0)- Built-in Controller (ST7920)
- +5V Power Supply
- 1/64 Duty Cycle
- Built-in Blue Backlight
- 12864 LCD Display Module 128×64 Dots Graphic Blue Color Backlight
- LCD display module with blue backlight.
- Small and light appearance, it is easy and convenient to use.
- Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
SKU: EAP-00001422,000 Ks - Electronic Parts, Module, OLED Display Module
TM1637 Clock Display Module
13 in stock0 out of 5(0)- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
- The counter project using 7 segment display.
- 4 M2 screws positioning holes for easy installation
SKU: EAP-0000072,700 Ks
There are no reviews yet.