No products in the cart.
Component, Electronic Parts, PCB Circuit Board
Double Side SMD to DIP Converter Board
Availability:
In stock
- Type : Good Quality
- Pitch : 2.54mm (DIP Side)
- Different SMD to DIP Adapter
- Double sided, different footprints on both sides
- QFN, SOP, foot prints
- Please find the exact Types listed in the Description below
Price range: 200 Ks through 2,900 Ks
- 0805 0603 0402 to DIP Converter Board
- SOT89 SOT223 to DIP Converter Board
- SOP8 SSOP8 to DIP Converter Board
- SOP10 SOT23 to DIP Converter Board
- SOP14 SSOP14 to DIP Converter Board
- SOP16 SSOP16 to DIP Converter Board
- SOP20 SSOP20 to DIP Converter Board
- SOP24 SSOP24 to DIP Converter Board
- SOP28 SSOP28 to DIP Converter Board
- SOP56 SSOP56 to DIP Converter Board
- QFN32 QFN40 to DIP Converter Board
- QFN32 QFP32 to DIP Converter Board
- QFN44 QFP44 QFN48 QFP48 to DIP Converter Board
- QFN56 QFP56 QFN64 QFP64 To DIP Converter Board
- QFP (32 to 64 pin 0.8mm / 32 to 100 pin 0.5mm) to DIP Converter Board
- QFP32 to To DIP Converter Board
| Type | 0805 0603 0402, SOT89 SOT223, SOP8 SSOP8, SOP10 SOT23, SOP14 SSOP14, SOP16 SSOP16, SOP20 SSOP20, SOP24 SSOP24, SOP28 SSOP28, SOP56 SSOP56, QFN32 QFN40, QFN32 QFP32, QFN44 QFP44 QFN48 QFP48, QFN56 QFP56 QFN64 QFP64, QFP32 to 64, QFP 32 |
|---|
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, OLED Display Module
0.91 OLED Display Module (Blue)
75 in stock- 0.91 inch I2C/IIC 128×32 OLED Display Module
- Work perfectly well without the need of back light.
- 128*32 high resolution, ultra wide viewing angle
- The display is self-illuminating
- Power requirement is low
- Fully compatible with multiple controlling chips including Arduino and more.
- Better performance characteristics than traditional LCD and LED displays.
SKU: EAP-000020 - Detection & Sensor Module, Electronic Parts, Module
HTU21D Temperature and Humidity Sensor Module
Stock outDetection & Sensor Module, Electronic Parts, ModuleHTU21D Temperature and Humidity Sensor Module
Out of stock- ​Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10k resistors to limit 5V signals
- Only one HTU21D sensor can reside on the I2C bus at a time
SKU: EAP-000002 - Development Board, Electronic Parts, ESPRESSIF(ESP)
ESP32-Cam Development Board
30 in stock- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Up to 240MHz, up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRAM
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras with built-in flash
- Support for images WiFI upload
- Support TF card
- Support multiple sleep modes
- Embedded Lwip and FreeRTOS
- Support STA/AP/STA+AP working mode
- Support Smart Config/AirKiss One-click distribution network
- Support for serial local upgrade and remote firmware upgrade (FOTA)
SKU: EAP-000024 - DIY Items, Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
3 in stock- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-000011
There are no reviews yet.