All Products
Showing 217–252 of 883 results
- Electronic Parts, Module
DC Voltage Sensor Module (0~25V)
11 in stock- Voltage input range: DC 0-25V
- Voltage detection range: DC 0.02445V-25V
- Voltage Analog Resolution: 0.00489V
- DC input connector: Terminal cathode connected to VCC, GND negative pole
- Output interface: “+” connect 5/3.3V, “-” connect GND, “s” connect the Arduino AD pins
SKU: EAP-001135 - DIY Items, Electronic Parts, Module, Trending Items
DC Voltmeter (0~30V, Red, 0.36″)
27 in stock- Measuring range: 0-30 V
- Maximum Input Voltage: 30V
- Display Color: Red
- Dimension: 23 x 15 x 10mm (L x W x H)
- Display Type: 3 Digit 0.36″ LED display
- Cable Length: 195mm
- Display Type: 3Digit 0.36” LED Display
- 0.1V for above 10V, 0.01V for below 10V
SKU: EAP-001088 - DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
DC-DC Step-up Adjustable Power Supply Module (150W, 6A)
In StockDIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsDC-DC Step-up Adjustable Power Supply Module (150W, 6A)
62 in stock- Input voltage :10-32V
- Output voltage: 12-35V (adjustable)
- Output Current: 10A (MAX)
- Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
SKU: EAP-000758 - Component, Electronic Parts, Sensors
DHT22 Temperature and Humidity Sensor
7 in stock- 3 to 5V power and I/O
- 2.5mA max current use during conversion (while requesting data)
- Good for 0-100% humidity readings with 2-5% accuracy
- Good for -40 to 80°C temperature readings ±0.5°C accuracy
- No more than 0.5 Hz sampling rate (once every 2 seconds)
- Body size 15.1mm x 25mm x 7.7mm
- 4 pins with 0.1″ spacing
SKU: EAP-000293 - Electrical & Mechanical, Equipment & Instruments, Multimeter
Digital Multimeter (DM-9205A)
Out of stock- Model : DM-9205A
- Color : Red
- Voltage DC 200mV/2V/20V/200V/1000V ±(0.5%+3)
- Voltage AC 200mV/2V/20V/200V/700V ±(0.8%+3)
- Current DC 2mA/20mA/200mA/20A ±(1.0%+3)
- Current AC 2mA/20mA/200mA/20A ±(2.0%+3)
- Resistance 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20 MΩ/200
- MΩ ±(0.8%+3)
- Capacitance 20nF/200nF/2μF/20μF/200μF
- ±(4.0%+3)
- Diode test YES
- Triode test YES
- On-off test YES
- Low battery display YES
- 3 1/2digits display
- 9V battery
SKU: EQT-000020 - DIY Items, Electrical & Mechanical, Equipment & Instruments, Multimeter, Trending Items
Digital Multimeter (DT-832)
In StockDIY Items, Electrical & Mechanical, Equipment & Instruments, Multimeter, Trending ItemsDigital Multimeter (DT-832)
29 in stock- Multifunction: Can measure AC/DC voltage, DC current, resistance, diode, hFE, continuity and square wave output.
- Portable design: It’s small and can be put into pocket, easy to carry.
- Wide range of applications: It’s a perfect tool for the laboratory, factory and home.
- Clear to read: With large LCD display, convenient to read data.
- More advantages :Low battery indication, continuity buzzer and overload protection.
SKU: EQT-000018 - DIY Items, Equipment & Instruments, Equipment & Tools, Multimeter, Tools, Trending Items
Digital Multimeter (DT9205A)
Stock outDIY Items, Equipment & Instruments, Equipment & Tools, Multimeter, Tools, Trending ItemsDigital Multimeter (DT9205A)
- Product size: about 172.9×87.7×33.9mm/6.81×3.45×1.33in
- Power supply: 9V 6F22 battery or AAA*2 battery (included)
- Working temperature: 0-40℃
- DC voltage: 200m-2-20-200-1000V±0.5%
- AC voltage: 2-20-200-750V±1.0%
- DC current: 2m-20m-200m-20A±1.0%
- Alternating current: 2m-20m-200m-20A±1.5%
- Resistance: 200-2K-20K-200K-2M-20M-200M±1.0%
- Capacitance: 20n-200n-2u-20u-2mF±4.0%
- Diode: Yes
- Color: Yellow, Red
SKU: n/a - Electrical & Mechanical, Equipment & Instruments, Multimeter
Digital Multimeter (XL830L)
DiscontinuedStock outElectrical & Mechanical, Equipment & Instruments, MultimeterDigital Multimeter (XL830L)
Out of stock- Model: X830L
- DC Voltage 200mV/2V/20V/200V/600V+/-(0.5percent)
- AC Voltage 200V/600V+/-(1.0percent)
- DC Current 200 A/2mA/20mA/200mA/10A+/-(1.0percent)
- Resistance 200Omega/2kOmega/20kOmega/200Omega/2MOmega+/-(1.0percent)
- Triode Measurement Yes (PNP/NPN Triode hFE)
- Input Resistance 1MOmega
- Battery Type 9V ( Not include) Max.
- Display 1999 Display
- Size 45 X 20MM
- Dimensions 145 x 70 x 40mm
- Color: Black
SKU: EQT-000019 - Electronic Parts, Module
Digital to Analog Stereo Audio Converter Module
8 in stock- Digital to Analogue Stereo Audio Converter Module
- Supports Major Audio Data Interface formats.
- Based on a multibit delta-sigma modulator with a linear analogue low-pass filter.
- Complete stereo sound analog output systems, including interpolation, multibit D/A conversion and analog output filtering in a 10-pin package.
SKU: EAP-001143 - Component, DIY Items, Electronic Parts, LED & Optoelectronics, Trending Items
Digital Voltmeter & Ammeter LED Dual Display
In StockComponent, DIY Items, Electronic Parts, LED & Optoelectronics, Trending ItemsDigital Voltmeter & Ammeter LED Dual Display
- Accuracy: 1
- Color: Red
- Operating Voltage (VDC): 5
- Current Consumption (mA): 60
- Test Voltage (V): 0 to 100
- Test Current (A): 1 to 100
- Refresh Speed (ms): 500 (one time)
- Operating Temperature (°C): -10 to 60
- Height (mm): 30
- Length (mm): 20
- Width (mm): 50
- Shunt Resistor Dimensions (mm): 120x25x20 (LxWxH)
- Weight (gm): 14
- Shipment Weight: 0.018 kg
- Shipment Dimensions: 7 × 4 × 3 cm
SKU: n/a - DIY Items, Electrical & Mechanical, Magnet, Mechanical
Dis/Circular Magnet Series
- Super strong Rare-Earth magnets – once they get stuck with each other, they are hard to break apart.
- Can also be used to extend protected lithium batteries with recessed contact points.
- Electrically conductive (making them suitable to extend recessed batteries).
- Perfect for sticking notes on fridge doors. Great for do-it-yourself projects.
SKU: n/a - Electronic Parts, Module, Motor Driver Module
DRV8833 2 Channel Motor Driver Module
31 in stock- Dual-H-bridge motor driver:
- Operating voltage: 2.7 V to 10.8 V
- Output current: 1.2 A continuous (2 A peak) per motor.
- Motor outputs can be paralleled to deliver 2.4 A continuous (4 A peak) to a single motor.
- 3V- and 5V Logic Voltage compatible
- Under-voltage lockout and protection against over-current and over-temperature.
- Reverse-voltage protection circuit.
- Current limiting can be enabled by adding sense resistors.
SKU: EAP-000877






























