No products in the cart.
- SG3525A PWM control chip
- 78M05 regulator chip, providing a reliable voltage for reference
- two precision adjustable resistors, R3 controls the duty cycle, R4 control frequency
- onboard power indicator
- the working voltage: 8 ~ 12V
- board size: 30.8 (mm) x18 (mm)
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Detection & Sensor Module, Electronic Parts, Module
DHT11 Temperature and Humidity Sensor Module
In StockDetection & Sensor Module, Electronic Parts, ModuleDHT11 Temperature and Humidity Sensor Module
386 in stock- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation)
- Temperature measuring range: 0~+50degree
- Humidity measurement accuracy: ±5.0%RH
- Temperature measurement accuracy: ±2.0degree
- Power Supply： 3.3~5.5V DC
- Output： 4 pin single row
- Interchangeability： Fully Interchangeable
- Long-Term Stability： <±1%RH/year
SKU: EAP-000003 - Development Board, Electronic Parts, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
Stock outDevelopment Board, Electronic Parts, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
Out of stock- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-000607 - Development Board, Electronic Parts, STM
STM32F103C8T6 ARM Development Board
8 in stock- 100% Brand new and high-quality STM32 Board
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
- Reset(POR/PDR).
- 4-16MHz crystal.
- Onboard Mini USB interface, you can give the board power supply and USB communication.
SKU: EAP-000021 - DIY Items, Electronic Parts, Module, Relay Module
1 Channel Relay Module (5V,10A)
18 in stock- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: EAP-000013
There are no reviews yet.