No products in the cart.
DIY Items, Electronic Parts, Module
Type C Socket Adatper Module (Female)
Availability:
In stock
This USB Type-C Female Module offers a perfect solution for integrating a modern Type-C charging port into your electronic projects. It is widely used to retrofit older legacy hardware (such as upgrading Micro-USB or Mini-USB electronics) to the ubiquitous USB-C interface.
600 Ks
In stock
- The Type C Socket Adatper Female Module provides easy access to the basic USB power and USB 2.0 data lines from a USB Type-C female connector.
- The module breaks out the connector into four clearly labeled terminals: V, D−, D+, and G, making it convenient for prototyping, DIY electronics, custom USB cables, power connections, and microcontroller projects.
- The large plated holes make soldering wires or header pins easier compared with soldering directly to the small contacts of a USB Type-C connector.
- Product Type: USB Type-C Breakout Module
- Connector: USB Type-C Female
- Interface: Breakout / Solder Pads
- Number of Breakout Pins: 4
- Power Positive: V / VBUS
- Ground: G / GND
- Data Positive: D+
- Data Negative: D−
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Detection & Sensor Module, Electronic Parts, Module
MFRC-522 RFID Reader Module
109 in stock- RC522 Features
- 13.56MHz RFID module
- Operating voltage: 2.5V to 3.3V
- Communication : SPI, I2C protocol, UART
- Maximum Data Rate: 10Mbps
- Read Range: 5cm
- Current Consumption: 13-26mA
- Power down mode consumption: 10uA (min)
SKU: EAP-000005 - Electronic Parts, Module, OLED Display Module
TM1637 Clock Display Module
46 in stock- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
- The counter project using 7 segment display.
- 4 M2 screws positioning holes for easy installation
SKU: EAP-000007 - Electronic Parts, LCD Display Module, Module
20×4 LCD Display Module + I2C Expander Module
- 2004 204 20X4 Character LCD Display Module Blue Backlight
- Blue & Green backlight
- Fully assembled and tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
SKU: n/a
There are no reviews yet.