No products in the cart.
Battery, Component, Electronic Parts
New cell 18650 Li-ion High Quality Rechargeable Battery
Availability:
Out of stock
- Capacity : 2000 mAh (±5%)
- Charge/Discharge Rate: 3C/ 5C/ 10C
- Nominal Voltage : 3.7V
- Charging Voltage : 4.2V (maximum)
- Size : 65mm*18mm
4,700 Ks – 5,500 Ks
The 18650 battery is a model of rechargeable battery of lithium of 3.7 volts. These rechargeable batteries are very similar to AA batteries but a little bit bigger size. These 18650 batteries also calling Li-ion batteries. The advantage of these rechargeable batteries is there are very lightweight batteries
| Capacity | 2000mAh |
|---|---|
| Charge/Discharge Rate | 3C, 5C, 10C |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, OLED Display Module
TM1637 Clock Display Module
24 in stock- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
- The counter project using 7 segment display.
- 4 M2 screws positioning holes for easy installation
SKU: EAP-000007 - Electronic Parts, Module, Detection & Sensor Module
Raindrop Detection Sensor Module
2 in stock- The LM393, use of the wide voltage comparator
- Provide both digital and analog output
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- The sensor uses the high-quality FR – 04 double material, the large area of 5.5*4.0 CM
- Treatment of nickel plating and surface, have fight oxidation, electrical conductivity, and life has more superior performance
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15mA
- With potentiometer sensitivity adjustment
- The output format: digital switch output (0 and 1) and analog AO voltage output;
- Has a fixed bolt hole, convenient installation
SKU: EAP-000001 - Electronic Parts, Module, Relay Module
8 Channel Relay Module (5V,10A)
out of stockDC or AC signal, control, you can control the 220V AC load;
There is a normally open and one normally close contact;
The module is compliant with international safety standards, control and load areas isolation trenches.SKU: EAP-000010 - Electronic Parts, Module, Relay Module
2 Channel Relay Module (5V,10A)
8 in stock- Switching mains loads
- Home automation
- Battery backup
- High current load switching
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
SKU: EAP-000012
There are no reviews yet.