No products in the cart.
Component, Electronic Parts, Switch, Button & Connector
Round Cap for Square tactile Switch (12x12x7.3 mm)
Availability:
In stock
- Easy to install, good quality for long time use
- Great replacement for the old or broken buttons cap on the tactile switch
- Fits on a 12 x 12 x 7.3 mm tactile push button switch.
- Contact resistance: 50m Max (initial)
- Insulation resistance: 100 M min DC (250 V)
- Color: blue, green, red and black
100 Ks
It is a Round Cap for Momentary Tactile Push Button Switch 12 x 12 x 7.3 mm.
Round Cap for Square tactile Switch(12x12x7.3 mm, Blue)
Round Cap for Square tactile Switch(12x12x7.3 mm, Green)
Round Cap for Square tactile Switch(12x12x7.3 mm, Red)
Round Cap for Square tactile Switch(12x12x7.3 mm, Black)
| Color | Black, Blue, Green, Red, White, Yellow |
|---|
- Easy to install, good quality for long time use
- Great replacement for the old or broken buttons cap on the tactile switch
- Fits on a 12 x 12 x 7.3 mm tactile push button switch.
- Contact resistance: 50m Max (initial)
- Insulation resistance: 100 M min DC (250 V)
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, LCD Display Module
20×4 LCD Display Module + I2C Expander Module
in stock- 2004 204 20X4 Character LCD Display Module Blue Backlight
- Blue & Green backlight
- Fully assembled and tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
SKU: n/a - Electronic Parts, Module, Relay Module
8 Channel Relay Module (5V,10A)
29 in stockDC or AC signal, control, you can control the 220V AC load;
There is a normally open and one normally close contact;
The module is compliant with international safety standards, control and load areas isolation trenches.SKU: EAP-000010 - Electronic Parts, Development Board, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
Stock outElectronic Parts, Development Board, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
out of stock- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-000607 - Electronic Parts, Module, OLED Display Module
0.96 OLED Display Module (128×64) (Blue)
out of stock- Work perfectly well without the need of back light.
- 128*64 high resolution, ultra wide viewing angle
- Super low power consumption–only 0.08W when the whole screen lights up and 0.06W when displaying characters
- Fully compatible with multiple controlling chips including Arduino and more.
- Support a wide range of voltage input
SKU: EAP-000019
There are no reviews yet.