YP-05 FTDI FT232L USB to TTL Converter Module

SKU: EAP-001168

In stock

  • Chip: FT232RL. Draw out all signal port of FT232RL chip. Standard interface, compatible with a variety of official Arduino controller
  • RXD / TXD transceiver communication indicator
  • USB power supply, can choose 5V or 3.3V, set by jumper
  • With over current protection, using 500mA self-restore fuse. Pin definition: DTR, RXD, TX, VCC, CTS, GND
  • Pitch: 2.54mm.
  • Size: 36 x 18mm (L x W)
  • Interface: Mini USB

4,500 Ks

In stock

FTDI TTL Module FT232RL Serial Converter FTDI USB To TTL Converter Adapters 5V 3.3V USB To Serial Converter FT232 FTDI Module 6 Pin Header

This USB to TTL serial adapter is ideal for many uses, including: programming microprocessors such as ARM, AVR; working with computing hardware like routers and switches; serial communication with many devices including GPS devices or serial terminals on devices like Raspberry Pi.

Unlike most USB to TTL serial adapters, this adapter supports both 5V and 3.3V operation! Simply set the jumper as required to choose between 5V and 3.3V as labelled on the board.

The FTDI adapter comes with a fitted right-angle connector allowing you to use it straight away. If you need to access any of the other inputs or outputs of the FT232RL, all the useful signals are provided as through-hole solder pads – ideal for use with straight headers into a breadboard, for example.


  • Product performance: Standard interface , compatible with a variety of For Official Controller OriginalFT232Chip, stable performance With power , sending, receiving indicator , working status Have 3.3V And 5V Power supply options Do ordinary USB Serial TTL Modules, download STCSCM
  • Introduction FT23R
  • With the development of computer technology , parallel and serial ports on the PC slowly disappeared , and now even the parallel port of the desktop are rare . But for engineers, parallel and serial interfaces are essential , especially in the serial . For computers without serial ports , the most convenient solution is to use USB to serial chip to virtual serial port out , many manufacturers have produced such a chip , such as silicon LABS of CP210x series , TI ‘s TUSB3410, Nanjing Qin Heng CH34x series, FTDI’s FT232 series , Prolific ‘s PL230x series, Echo ‘s ARK3116 so on. From the stability point of view, the most reliable or FT232 series , you can use it to ease the debugging process without fear of a blue screen appears.
  • FT232R chip is a single-chip solution , generally do not need to use basic peripherals , and even crystal , USB matching resistor , place the product information have been integrated in the internal EEPROM of the . FT232R There are some more useful features, details can be found FT232R data sheet .
  • Datasheet Download : www.ftdichip.com/Products/ICs/FT232R.htm
  • Introduction: hardware
  • using FTDI FT232RL chip companies ;
  • FT232RL chip lead all the signal port , TTL / CMOS level ;
  • RXD / TXD Transceiver Communications LED ;
  • USB -powered, 5V or 3.3V

Pin functionality

  • DTR – Reset the other hardware device
  • RX – Used to receive the serial data.
  • TX – Used to transmit the serial data.
  • VCC – Provides 5V or 3.3V voltage output as per the requirement
  • CTS – Enable or disable the programming mode of the device
  • GND – Ground pin
SKU: EAP-001168 Categories: ,
  • Support 3.3V, 5V
  • Chipset: FT232RL
  • USB power has over current protection, using 500MA self-restore fuse
  • RXD/TXD transceiver communication indicator
  • Pin definition: DTR,RXD,TX,VCC,CTS,GND
  • Pitch:2.54mm
  • Module Size: About 36mm(length)*18mm(width)
  • Interface : Mini USB

Based on 0 reviews

0.0 overall

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.