No products in the cart.
Trending Items
Showing 181–204 of 204 results
- Component, DIY Items, Electrical & Mechanical, Electronic Parts, Switch, Button & Connector, Switch, Button & Connector, Trending Items
Wire Connector CH-2/ CH-3
In StockComponent, DIY Items, Electrical & Mechanical, Electronic Parts, Switch, Button & Connector, Switch, Button & Connector, Trending ItemsWire Connector CH-2/ CH-3
CH2 Wire Connector
- Type: 2Pin Connector
- Color : White
- Rated Voltage & Current & Watt : 250V/ 2A/ 100W
- Size : 19mm*17mm*13mm
CH3 Wire Connector
- Type: 3Pin Connector
- Color : White
- Rated Voltage & Current & Watt :220V/ 1-2A/ 200W
- Size : 19mm*27mm*13mm
SKU: n/a - Battery Charging Module, DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
XH-M240 18650 Li-ion Battery Capacity Tester
In StockBattery Charging Module, DIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsXH-M240 18650 Li-ion Battery Capacity Tester
4 in stock- Model: XH-M240
- Display accuracy: 0.1
- Measurement accuracy: 1mAH
- Power supply: DC 5V-12V/18650 battery (Not included)
- Standby current: 5-7mA
- Discharge current: About 500mA
- Load power: 10W, 8Ω
- Installation hole: 3mm
SKU: EAP-001022 - Battery Charging Module, DIY Items, Electronic Parts, Module, Trending Items
XH-M603 Charging Control Module With LED Display (Input DC 10-30V, 20A, Direct Output)
In StockBattery Charging Module, DIY Items, Electronic Parts, Module, Trending ItemsXH-M603 Charging Control Module With LED Display (Input DC 10-30V, 20A, Direct Output)
10 in stock- Model:XH-M603
- Input Voltage: DC 10-30V
- Current: 20A
- Display Precision:0.1V
- Control Precision:0.1V
- Output Type: direct output
SKU: EAP-000845 - DIY Items, Electronic Parts, Module, Trending Items
XL4016 Step Down Converter Module (4~40Vin, 300W, 10A)
In StockDIY Items, Electronic Parts, Module, Trending ItemsXL4016 Step Down Converter Module (4~40Vin, 300W, 10A)
27 in stock- Maximum Power Output: 300W
- Maximum Current Supply: 10A
- Input Voltage Range: 4~40V
- Output Voltage Range: 1.2V to 35V
- Step Down (Buck) Converter
- Adjustable Output Voltage
- Adjustable Output Current
SKU: EAP-001289 - DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
XL6009 DC-DC Step-up Adjustable Power Supply Module
In StockDIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsXL6009 DC-DC Step-up Adjustable Power Supply Module
186 in stock- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v
SKU: EAP-000762 - DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
XL6009 DC-DC Step-up/down (Boost-Buck) Adjustable Power Supply Module
In StockDIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsXL6009 DC-DC Step-up/down (Boost-Buck) Adjustable Power Supply Module
95 in stock- Automatic Buck Boost Converter
- Output Current: 4A
- Switching Frequency: 400 Khz
- Input Voltage: 3.8V to 32V
- Output Voltage: 1.25V to 35V
- Conversion Efficiency: <94%
- Non Isolated Buck Boost Converter
- Dimensions: 48 x 25 x 14mm (L x W x H)
Applications:
- Solar Cell
- Car Regulator
- Wind Power
SKU: EAP-001086 - Component, DIY Items, Electronic Parts, Switch, Button & Connector, Trending Items
XT60 Connector
In StockComponent, DIY Items, Electronic Parts, Switch, Button & Connector, Trending ItemsXT60 Connector
- Current Rating:Â 60A continuous, with a peak current of 100A.
- Contact Material:Â Gold-plated brass for optimal conductivity and corrosion resistance.
- Wire Gauge:Â Supports cables from 12AWG to 10AWG, depending on the variant.
- Mating Cycles:Â Rated for 1000 mating cycles, ensuring long-term reliability.
- Contact Resistance: Less than 5 mΩ.
- Voltage Rating:Â Generally rated for 500V DC
SKU: n/a - DIY Items, Electronic Parts, Module, Timer Module, Trending Items
XY-J02 Timer Module (DC 6~30V, 400W, 0.1s~999mins)
In StockDIY Items, Electronic Parts, Module, Timer Module, Trending ItemsXY-J02 Timer Module (DC 6~30V, 400W, 0.1s~999mins)
52 in stock- Working voltage: 6–30V supports micro USB 5.0V power supply.
- Trigger signal source: High level triggering (3.0V – 24V) signal does not improve the system’s anti jamming capability with the system.
- Output capability: Equipment that can control DC 30V 5A or less than 220v5A.
- Static curren: 20mA working current: 50mA
- Service life: Greater than 100 thousand times
- Working temperature: -40 to 85 C;
- Size: 6.2*3.8*1.7cm
- Time range: 0.1 second (min) ~999 min (max) continuous tunable
With optocoupler isolation, enhance anti-interference ability, industrial grade circuit boards, set parameters after power failure forever
SKU: EAP-001035 - Arduino, Development Board, Electronic Parts, Trending Items
Arduino Mega 2560 R3 Development Board
In StockArduino, Development Board, Electronic Parts, Trending ItemsArduino Mega 2560 R3 Development Board
38 in stock- Bootloader – to allow downloading of ‘sketches’ via USB without having to go through other external writers.
- Powered from USB or via external PSU (not supplied). The device will automatically switch between power inputs.
- Heavy gold plate construction.
SKU: EAP-000027 - Arduino, Development Board, Electronic Parts, Trending Items
Arduino Nano Development Board
139 in stock- Board type: Arduino Nano w/ ATmega328
- Can be directly programmed with the Mini USB cable
- 100% compatible with program, expansion shields, IDE of Arduino Nano v3.0
- USB to serial TTL chip (CH340) supports win7 / win8 32bits, 64bits, Linux, MAC
- Supports ISP download
- Microcontroller: Atmel ATmega328P
- Working Voltage: 5 V
- Working current: 500mA (Max)
- Input Voltage: 7-12 V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- Flash Memory: 32 KB of which 2 KB used by bootloader
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
SKU: EAP-000028 - Arduino, Development Board, Electronic Parts, Trending Items
Arduino Uno R3 Development Board (IC)
In StockArduino, Development Board, Electronic Parts, Trending ItemsArduino Uno R3 Development Board (IC)
130 in stock- DIY project prototyping
- Developing varied varieties of projects that require a code based control
- Automation System development
- Learning AVR programming
- Entry level circuit designing
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6
SKU: EAP-000029 - DIY Items, Electrical & Mechanical, Equipment & Instruments, Multimeter, Trending Items
Digital Multimeter (DT-830B)
In StockDIY Items, Electrical & Mechanical, Equipment & Instruments, Multimeter, Trending ItemsDigital Multimeter (DT-830B)
35 in stock- Model: DT-830B
- Color: Black
- Diode Test: Yes
- hFE Test: Yes
- Low battery indication: Yes
- Auto polarity display: Yes
- Overload Protection: Yes
- DC Voltage: 200mV/2V/20V/200V/1000V
- AC Voltage: 200V/750V
- DC Current: 200uA/2000uA/20mA/200mA/10A
- Resistance: 200 /2K /20K /200K /2000K
- Power: 9V battery (Not included)
- Product Size: 125 X 70 X 25mm
SKU: EQT-000022 - DIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Trending Items
Flush Cutting Pliers (PCAFC-170)
In StockDIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Trending ItemsFlush Cutting Pliers (PCAFC-170)
50 in stockGood quality precision flush cutters. Special suitable for cut wire, electronic feet, trimming plastic products, cut a small metal wire, and so on.
Color: Blue
Material: steel jaw, anti-slip rubber handle.SKU: EQT-000014 - Cutter, DIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Trending Items
Micro-Shear Precision Flush Cutter (Xuron 170-II)
In StockCutter, DIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Trending ItemsMicro-Shear Precision Flush Cutter (Xuron 170-II)
27 in stockOverall Length: 5 inches (127 mm)
Cutting Capacity: 18 AWG (1 mm) soft wire
Rockwell Hardness: 54-56 Rc
Type of Cut: Flush
Note: Not for use on hardened wireSKU: EQT-000013 - DIY Items, Electrical & Mechanical, Equipment & Instruments, Trending Items
Precision Screwdriver Set (32 in 1)
In StockDIY Items, Electrical & Mechanical, Equipment & Instruments, Trending ItemsPrecision Screwdriver Set (32 in 1)
1 in stock- This 32-in-1 screwdriver set is made of sturdy, high-hardness materials, comes in a self-contained tool box
- It is ideal for precision repairs for small electronics, small machinery, and personal devices.
- The bits are magnetized for maximum ease of use, and the non-slip handle makes for easy use.
- Great for watches, eyeglasses, cell phones, tablets and more.
SKU: EQT-000005 - Electrical & Mechanical, Electronic Parts, Motor, Trending Items
SG90 Micro Servo Motor
The TowerPro SG90 servo motor is one of the most popular servo motors at the moment. This servo motor has a torque of up to 1.56 kg * cm, with which all kinds of sensors, cameras or even small robots can easily be moved.
SKU: n/a - Battery Charging Module, DIY Items, Electronic Parts, Module, Trending Items
TP4056 Lithium Battery Charging Module(Micro)
In StockBattery Charging Module, DIY Items, Electronic Parts, Module, Trending ItemsTP4056 Lithium Battery Charging Module(Micro)
41 in stock- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
SKU: EAP-000116 - DIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Tools, Tools, Trending Items
Wire Crimping Tools (TUOSEN, 11390)
In StockDIY Items, Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, ESD Supplies, Industrial Equipment & Materials, Tools, Tools, Trending ItemsWire Crimping Tools (TUOSEN, 11390)
10 in stockSpecial suitable for cut wire, electronic feet, trimming plastic products, cut a small metal wire, and so on.
Style: 11390
Handle material: PPR
Clamp head material; 65 manganese steel
Pliers handle length: 110mm
Stripping diameter; 20-260mm
Full length: 165mm
Handle length: 95mm
Cutting edge length: 40mm
Stripping range: 0.6-2.6mmSKU: EQT-000015
