3mm Bicolor LED(Common Cathode, Green & Red)
Component, Electronic Parts, LED & Optoelectronics
3mm Bicolor LED(Common Cathode, Green & Red)x 1 Pcs
SKU: EAP-000708
Availability:
In stock
80 Ks
In stock
Based on 0 reviews
0.0 overall
0
0
0
0
0
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
3 in stock0 out of 5(0)- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-0000116,000 Ks - Electronic Parts, Development Board, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
In StockElectronic Parts, Development Board, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
3 in stock0 out of 5(0)- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-00060719,800 Ks - Electronic Parts, Module, OLED Display Module
TM1637 Clock Display Module
13 in stock0 out of 5(0)- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
- The counter project using 7 segment display.
- 4 M2 screws positioning holes for easy installation
SKU: EAP-0000072,700 Ks - Electronic Parts, Module, Detection & Sensor Module
Raindrop Detection Sensor Module
12 in stock0 out of 5(0)- The LM393, use of the wide voltage comparator
- Provide both digital and analog output
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- The sensor uses the high-quality FR – 04 double material, the large area of 5.5*4.0 CM
- Treatment of nickel plating and surface, have fight oxidation, electrical conductivity, and life has more superior performance
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15mA
- With potentiometer sensitivity adjustment
- The output format: digital switch output (0 and 1) and analog AO voltage output;
- Has a fixed bolt hole, convenient installation
SKU: EAP-0000011,600 Ks
There are no reviews yet.