No products in the cart.
Electronic Parts
Showing 73–108 of 628 results
- Electronic Parts, Module, Power Supply Module
AMS1117-3.3V Voltage Regulator Module
Out of stockThis voltage regulator module is based on the AMS1117 3.3V regulator. It is capable of regulating a wide range of input voltage (4.0 to 12V) down to a fixed 3.3V output at up to 1A (Vin = 4.5V). Standard 0.1″ header pins provide a means of connecting to its input and output terminals. These header pins have also been conveniently placed so that the module can be inserted face down into standard.
SKU: EAP-000911 - Electronic Parts, Module, Power Supply Module
AMS1117-3.3V Voltage Regulator Module
Out of stock- 3.3V Output
- 5V Input. Can use higher input voltages, but see our notes below about derating the current at higher voltages
- 800mA maximum rated current. 500mA recommended max
- Power LED
- Short circuit and thermal protection built-in
- Small footprint
SKU: EAP-000880 - Arduino, Development Board, Electronic Parts, Trending Items
Arduino Uno R3 Development Board (IC)
In StockArduino, Development Board, Electronic Parts, Trending ItemsArduino Uno R3 Development Board (IC)
245 in stock- DIY project prototyping
- Developing varied varieties of projects that require a code based control
- Automation System development
- Learning AVR programming
- Entry level circuit designing
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6
SKU: EAP-001109 - Arduino, Development Board, Electronic Parts, ESPRESSIF(ESP)
Arduino UNO R4 (WiFi)
Out of stockThe Arduino UNO R4 WiFi merges the RA4M1 microprocessor from Renesas with the ESP32-S3 from Espressif, creating an all-in-one tool for makers with enhanced processing power and a diverse array of new peripherals. With its built-in Wi-Fi® and Bluetooth® capabilities, the UNO R4 WiFi enables makers to venture into boundless creative possibilities. Furthermore, this versatile board boasts a convenient on-board 12×8 LED matrix and a Qwiic connector, offering ample space for innovation and unleashing creativity. This dynamic combination empowers makers to transform their ideas into reality and elevate their projects to unprecedented heights.
SKU: EAP-001337 - Arduino, Development Board, Electronic Parts, ESPRESSIF(ESP)
Arduino UNO R4 (WiFi)
12 in stockThe Arduino UNO R4 WiFi merges the RA4M1 microprocessor from Renesas with the ESP32-S3 from Espressif, creating an all-in-one tool for makers with enhanced processing power and a diverse array of new peripherals. With its built-in Wi-Fi® and Bluetooth® capabilities, the UNO R4 WiFi enables makers to venture into boundless creative possibilities. Furthermore, this versatile board boasts a convenient on-board 12×8 LED matrix and a Qwiic connector, offering ample space for innovation and unleashing creativity. This dynamic combination empowers makers to transform their ideas into reality and elevate their projects to unprecedented heights.
SKU: EAP-001338 - Arduino, Development Board, Electronic Parts
Arduino UNO Starter Kit
- For Arduino RFID learning suite, updated items including:
- 1602 screen for 1602, I2C control more convenient
- The new key chain and white CARDS, RFID module and RFID
- The DS1302 clock module has been added
- A new voice detection module
- Temperature humidity module has been added
- Water level detection module has been added
- 4 * 4 button module has been added
- 8 * 8 dot matrix module has been added.
SKU: n/a - Arduino, Development Board, Electronic Parts
Arduino® Nano ESP32 with headers
Out of stockThe new member to our iconic Nano family, the Nano ESP32. This board brings all the power of the well-known ESP32-S3 with the full support of the Arduino ecosystem, allowing makers to explore the world of Arduino and MicroPython without any blocker. Just unleash your creativity and start building for the next IoT project.
SKU: EAP-001164 - Arduino, Development Board, Electronic Parts
Arduino® UNO R4 Minima
Out of stockIntroducing the Arduino UNO R4 Minima! This board boasts the RA4M1 microprocessor from Renesas, delivering increased processing power, expanded memory, and additional peripherals. And the best part? It stays true to the reliable UNO form factor and operates at a practical 5 V voltage. Brace yourself for an upgrade like no other with the Arduino UNO R4 Minima!
SKU: EAP-001107 - Arduino, Development Board, Electronic Parts
Arduino® UNO R4 WiFi
Out of stockThe Arduino UNO R4 WiFi merges the RA4M1 microprocessor from Renesas with the ESP32-S3 from Espressif, creating an all-in-one tool for makers with enhanced processing power and a diverse array of new peripherals. With its built-in Wi-Fi® and Bluetooth® capabilities, the UNO R4 WiFi enables makers to venture into boundless creative possibilities. Furthermore, this versatile board boasts a convenient on-board 12×8 LED matrix and a Qwiic connector, offering ample space for innovation and unleashing creativity. This dynamic combination empowers makers to transform their ideas into reality and elevate their projects to unprecedented heights.
SKU: EAP-001106 - Component, Electronic Parts, Microcontroller IC
ATMEGA328P Microcontroller IC
9 in stock- 131 Powerful Instructions
- Most Single Clock Cycle Execution
- 32 x 8 General Purpose Working Registers
- Fully Static Operation
- Up to 20 MIPS Throughput at 20 MHz
- On-Chip 2-Cycle Multiplier
- 32 KB of In-System Self-Programmable Flash program memory
- 1 KB EEPROM
- 2 KB Internal SRAM
- Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
- Data retention: 20 years at 85°C
- 32-pin TQFP and 32-pin QFN/MLF
- 1.8-5.5V
- -40°C to 105°C
- 0-4 MHz @ 1.8 – 5.5V
- 0-10 MHz @ 2.7 – 5.5.V
- 0-20 MHz @ 4.5 – 5.5V
- Active Mode: 0.24 mA
- Power-Down Mode: 0.2 µA
- Power-Save Mode: 1.3 µA (Including 32 kHz RTC)
SKU: EAP-000349 - Component, Electronic Parts, Microcontroller IC, SMD Components
ATMEGA328PB Microcontroller IC (SMD)
In StockComponent, Electronic Parts, Microcontroller IC, SMD ComponentsATMEGA328PB Microcontroller IC (SMD)
3 in stock- 131 Powerful Instructions
- Most Single Clock Cycle Execution
- 32 x 8 General Purpose Working Registers
- Fully Static Operation
- Up to 20 MIPS Throughput at 20 MHz
- On-Chip 2-Cycle Multiplier
- 32 KB of In-System Self-Programmable Flash program memory
- 1 KB EEPROM
- 2 KB Internal SRAM
- Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
- Data retention: 20 years at 85°C
- 32-pin TQFP and 32-pin QFN/MLF
- 1.8-5.5V
- -40°C to 105°C
- 0-4 MHz @ 1.8 – 5.5V
- 0-10 MHz @ 2.7 – 5.5.V
- 0-20 MHz @ 4.5 – 5.5V
- Active Mode: 0.24 mA
- Power-Down Mode: 0.2 µA
- Power-Save Mode: 1.3 µA (Including 32 kHz RTC)
SKU: EAP-000350 - Component, DIY Items, Electronic Parts, Trending Items
Audio Jack Cable (3.5mm, Stereo, Male to Male)
Stock outComponent, DIY Items, Electronic Parts, Trending ItemsAudio Jack Cable (3.5mm, Stereo, Male to Male)
Out of stock- 3.5mm TRRS Stereo Male Plug to Male Plug
- Fully molded connectors with strain relief ensure a solid high quality connection between the connected devices
- Flexible PVC jacket
- Nickel plated connectors
- Color: Black
- Cable Length: 120cm
SKU: EAP-001141 - Battery Holder, Component, DIY Items, Electronic Parts
Battery Case (CR2032, BS-2-1)
Out of stock- Product Catalog: Battery Holder for CR2032
- Type: BS-2032-2-1
- Contact Resistance: 30 Milliohms Max
- Insulation Resistance: 1000 Mega Ohms Min
- Dielectric Voltage: 500V AC one sec level
- Operating Temperature: -25ºC – 85ºC
- Color: black 8
- Dimension:(0.5)cm/(0.19)inch (H)
SKU: EAP-000494 - Battery Holder, Component, DIY Items, Electronic Parts
Battery Case (CR2032)
300 in stock- High Quality Plastic Holder
- Small size, easy to carry
- With the 1Pc CR2032 Button Battery Holder Case, best for Soldering /Connecting.
- Type: Button Battery Socket Holder
- Battery type: 1 pc CR2032 button battery(batter is not included)
- Color: black
- Dimension:(0.5)cm/(0.19)inch (H)
SKU: EAP-000495 - Electronic Parts, Module, Power Supply Module
Breadboard Power Supply Module(3.3V, 5V)
59 in stock- Breadboard power supply module, compatible with 5V, 3.3V.
- Apply to MB102 breadboard
- Input voltage: 6.5-12 V (DC) or USB power supply
- Output voltage: 3.3V/5V can switch over
- Maximum output current: <700 ma
- Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V
- On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
SKU: EAP-000643 - Component, Electronic Parts, Integrated Circuits(ICs)
CD4013BM Dual D Flip Flop IC (SOP-14)
85 in stock- Maximum input current of 1µA at 18V (full package temperature range) and 100nA at 18V (25°C)
- 5V, 10V and 15V parametric ratings
- Meets all requirements of JEDEC tentative standard JESD 13B
- Supply voltage range from 3V to 18V
- Operating temperature range -55°C to 125°C
SKU: EAP-000920
