No products in the cart.
Electronic Parts
Showing 109–144 of 628 results
- Component, Electronic Parts, Integrated Circuits(ICs)
CH340N USB to TTL Converter IC (SOP-8)
11 in stock- Full speed USB device interface, USB 2.0 compatible.
- Emulate standard UART interface, used to upgrade the original serial devices or expand additional UART via USB.
- Original UART applications are totally compatible without any modification.
- Hardware full duplex serial UART interface, integrated transmit-receive buffer, supports communication baudrates varies from 50bps to 2Mbps.
- Supports common MODEM interface signals RTS, DTR, DCD, RI, DSR and CTS.
- Provides further RS232, RS485, RS422 interface, etc. through external voltage conversion chip.
- CH340R supports IrDA specification SIR infrared communication, supports baudrates varies from 2400bps to 115200bps.
- Software compatible with CH341, customers can use driver of CH341 directly.
- Supports 5V and 3.3V power supply even supports as low as 3V.
- CH340C/N/K/E and CH340B integrate 12MHz clock, no external crystal required, CH340B also integrates EEPROM used to configure the serial number, etc.
- RoHS compliant SOP-16, SOP-8, SSOP-20 and ESSOP-10, MSOP-10 lead-free package.
SKU: EAP-001125 - Electronic Parts, Module
CH376 USB Host Interface Module
4 in stock- The CH376 chip internal curing FAT file system, file operation is simple, fast,
- Support U disk, USB hard disk, USB flash drive and USB card reader, USB storage device
- Standard Capacity SD card support, high capacity HC-SD card as well as protocol-compatible MMC, TF card
- Support a variety of communication interfaces: 8-bit parallel, SPI interface and asynchronous serial
- Compatibility: Equipment manner compatible with CH372 compatible host with CH375
SKU: EAP-001166 - Electronic Parts, Module, Motor Driver Module
CNC Shield V3
8 in stock- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
SKU: EAP-000701 - Arduino, Development Board, Electronic Parts
D1 Wemos ESP8266 Development Board (Micro)
19 in stockThe WeMos D1 R2 Uno based ESP8266 a wireless 802.11 (Wifi) microcontroller development board compatible with the Arduino IDE. It turns the very popular ESP8266 wireless (WiFi) module into a fully fledged development board. The layout of this board is based on a standard Arduino hardware design.
SKU: EAP-001207 - Arduino, Development Board, Electronic Parts
D1 Wemos ESP8266 Development Board (Type C)
34 in stockThe WeMos D1 R2 Uno based ESP8266 a wireless 802.11 (Wifi) microcontroller development board compatible with the Arduino IDE. It turns the very popular ESP8266 wireless (WiFi) module into a fully fledged development board. The layout of this board is based on a standard Arduino hardware design.
SKU: EAP-001206 - Arduino, Development Board, Electronic Parts
D1 Wemos Mini ESP8266 Development Board
11 in stock- D1 Mini is mini WiFi board based on ESP8266
- Compatible with MicroPython, Arduino, nodemcu
- 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
- 1 analog input (3.3V max input)
- Built In USB-C Port
- On board reset button & LED on pin D4(GPIO2)
SKU: EAP-001224 - Electronic Parts, Module, Power Supply Module
DC 12V to 3.3V,5V and 12V Power Supply module
20 in stock- Output power on/off switch
- Two-row multiple pin outputs, easy to use and connect
- Red LED illuminates when input DC power is supplied and output is turned ON.
- Small and Handy Module.
- Dual-side plate design.
- Easy to use.
SKU: EAP-000515 - Component, DIY Items, Electronic Parts, Switch, Button & Connector, Trending Items
DC Power Jack (5.5mm)
In StockComponent, DIY Items, Electronic Parts, Switch, Button & Connector, Trending ItemsDC Power Jack (5.5mm)
864 in stock- Model Number :DC jack
- Type : ADAPTER, DC JACK
- Application :Power
- Product name :DC Power jack
- Rated load :DC30V 0.5A
- Contact Résistance:≤0.3Ω
- Insulation Voltage:≥100m Ω
- Working temperature:-40~75°
SKU: EAP-000514 - Component, DIY Items, Electronic Parts, Switch, Button & Connector, Trending Items
DC Power Socket Jack Connector Adapter (DC-017, Female, 5.5×2.1mm)
In StockComponent, DIY Items, Electronic Parts, Switch, Button & Connector, Trending ItemsDC Power Socket Jack Connector Adapter (DC-017, Female, 5.5×2.1mm)
845 in stock- Audio and video products: MP3, MP4, DVD;
- Digital products: digital camera, digital camera, etc;
- Remote control: remote control for vehicle, roll door and home anti-theft products;
- Communication products: mobile phone, car phone, telephone, building equipment, PDA, etc;
- Household appliances: TV, microwave oven, rice cooker, electric wind, electronic body scale, electronic fat scale, electronic kitchen scale, etc;
- Security products: videophone, monitor, etc;
- Toys: electronic toys, etc;
- 8. Computer products: camera, recorder, etc;
- 9. Fitness equipment: running machine, massage chair, etc;
SKU: EAP-000820 - Component, DIY Items, Electronic Parts, Switch, Button & Connector, Trending Items
DC Power Socket Jack Connector Adapter(DC-002,Female, 3.5×1.1mm)
In StockComponent, DIY Items, Electronic Parts, Switch, Button & Connector, Trending ItemsDC Power Socket Jack Connector Adapter(DC-002,Female, 3.5×1.1mm)
579 in stock- Plug Type: 3.5×1.1 mm
- Pin: 3
- Temperature: -30°C ~ +70°C.
- Rated load: up to DC 30V / 1.0A.
- Contact resistance: ≤0.03.
- Insulation resistance: ≥100 MΩ.
SKU: EAP-000637
