No products in the cart.
Electronic Parts
Showing 145–180 of 628 results
- Component, DIY Items, Electronic Parts, Switch, Button & Connector, Trending Items
DC Power Socket Jack Connector Adapter(DC-022,Female, 5.5×2.1mm)
In StockComponent, DIY Items, Electronic Parts, Switch, Button & Connector, Trending ItemsDC Power Socket Jack Connector Adapter(DC-022,Female, 5.5×2.1mm)
514 in stock- Widely used in small-scale as well as prototyping projects where 12 to 30 volts power supply needed
- Supports DC Power Jack: 2.1 x 5.5 mm
- Diameter: 14mm
SKU: EAP-000635 - Electronic Parts, Module
DC Voltage Sensor Module (0~25V)
11 in stock- Voltage input range: DC 0-25V
- Voltage detection range: DC 0.02445V-25V
- Voltage Analog Resolution: 0.00489V
- DC input connector: Terminal cathode connected to VCC, GND negative pole
- Output interface: “+” connect 5/3.3V, “-” connect GND, “s” connect the Arduino AD pins
SKU: EAP-001135 - DIY Items, Electronic Parts, Module, Trending Items
DC Voltmeter (0~30V, Red, 0.36″)
27 in stock- Measuring range: 0-30 V
- Maximum Input Voltage: 30V
- Display Color: Red
- Dimension: 23 x 15 x 10mm (L x W x H)
- Display Type: 3 Digit 0.36″ LED display
- Cable Length: 195mm
- Display Type: 3Digit 0.36” LED Display
- 0.1V for above 10V, 0.01V for below 10V
SKU: EAP-001088 - DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
DC-DC Step-up Adjustable Power Supply Module (150W, 6A)
In StockDIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsDC-DC Step-up Adjustable Power Supply Module (150W, 6A)
62 in stock- Input voltage :10-32V
- Output voltage: 12-35V (adjustable)
- Output Current: 10A (MAX)
- Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
SKU: EAP-000758 - Component, Electronic Parts, Sensors
DHT22 Temperature and Humidity Sensor
7 in stock- 3 to 5V power and I/O
- 2.5mA max current use during conversion (while requesting data)
- Good for 0-100% humidity readings with 2-5% accuracy
- Good for -40 to 80°C temperature readings ±0.5°C accuracy
- No more than 0.5 Hz sampling rate (once every 2 seconds)
- Body size 15.1mm x 25mm x 7.7mm
- 4 pins with 0.1″ spacing
SKU: EAP-000293 - Electronic Parts, Module
Digital to Analog Stereo Audio Converter Module
8 in stock- Digital to Analogue Stereo Audio Converter Module
- Supports Major Audio Data Interface formats.
- Based on a multibit delta-sigma modulator with a linear analogue low-pass filter.
- Complete stereo sound analog output systems, including interpolation, multibit D/A conversion and analog output filtering in a 10-pin package.
SKU: EAP-001143 - Component, DIY Items, Electronic Parts, LED & Optoelectronics, Trending Items
Digital Voltmeter & Ammeter LED Dual Display
In StockComponent, DIY Items, Electronic Parts, LED & Optoelectronics, Trending ItemsDigital Voltmeter & Ammeter LED Dual Display
- Accuracy: 1
- Color: Red
- Operating Voltage (VDC): 5
- Current Consumption (mA): 60
- Test Voltage (V): 0 to 100
- Test Current (A): 1 to 100
- Refresh Speed (ms): 500 (one time)
- Operating Temperature (°C): -10 to 60
- Height (mm): 30
- Length (mm): 20
- Width (mm): 50
- Shunt Resistor Dimensions (mm): 120x25x20 (LxWxH)
- Weight (gm): 14
- Shipment Weight: 0.018 kg
- Shipment Dimensions: 7 × 4 × 3 cm
SKU: n/a - Component, DIY Items, Electronic Parts, Switch, Button & Connector
DIP Switch (2.54mm Pitch, Red)
In StockComponent, DIY Items, Electronic Parts, Switch, Button & ConnectorDIP Switch (2.54mm Pitch, Red)
- DIP switches are used with other electronic components on printed circuit boards and are often used to customize the behavior of electronic devices in specific situations.
- Widely used in data processing, communications, remote control and anti-theft alarm systems requiring manual automatic programming products.
- Material: Plastic
- Pitch: 2.54mm
SKU: n/a - Electronic Parts, Module, Motor Driver Module
DRV8833 2 Channel Motor Driver Module
31 in stock- Dual-H-bridge motor driver:
- Operating voltage: 2.7‌‌ V to 10.8 V
- Output current: 1.2 A continuous (2 A peak) per motor.
- Motor outputs can be paralleled to deliver 2.4 A continuous (4 A peak) to a single motor.
- 3V- and 5V Logic Voltage compatible
- Under-voltage lockout and protection against over-current and over-temperature.
- Reverse-voltage protection circuit.
- Current limiting can be enabled by adding sense resistors.
SKU: EAP-000877 - Component, DIY Items, Electronic Parts, Switch, Button & Connector
DS-428 Push Button with Lock
In StockComponent, DIY Items, Electronic Parts, Switch, Button & ConnectorDS-428 Push Button with Lock
- Â Latching Push Button Switch : AC 125V 3A, AC 250V 1.5A;
- Terminals Quality : 2 Terminal
- 12mm Locking Latching Push Button Switch
- Material : Plastic,
- Colors : Red, Black, White, Yellow, Blue, Green
- Easy, secure mounting with snap-fit head and bod
SKU: n/a - Development Board, Electronic Parts, ESPRESSIF(ESP), Module
ESP32 Cam Baseboard (Micro)
9 in stockThe ESP32-CAM-MB Micro USB baseboard is an adapter designed to simplify programming and power supply for the standard ESP32-CAM module by providing a convenient Micro USB interface, eliminating the need for an external FTDI programmer.
SKU: EAP-001328 - Component, Electronic Parts, Microcontroller IC
ESP32 Chip IC (32S)
25 in stock- The smallest 802.11b/g/n WiFi BT SoC Module
- Low power 32-bit CPU, can also serve the application processor
- Up to 160MHz clock speed，Summary computing power up to 600 DMIPS
- Overview built-in 520KB SRAM
- Supports UART/SPI/I2C/PWM/ADC/DAC
- SMD-38 package for easy welding
- Support for OpenOCD debugging interface
- Deep sleep current as low as 6.5μA
- Embedded Lwip and FreeRTOS
- Supports STA/AP/STA+AP operation mode
- Support Smart Config/AirKiss technology
- General AT commands can be used quickly
- Support for serial port local and remote firmware upgrades (FOTA)
SKU: EAP-001133 - Arduino, Development Board, Electronic Parts, ESPRESSIF(ESP)
ESP32 Development Board (Type-C)
In StockArduino, Development Board, Electronic Parts, ESPRESSIF(ESP)ESP32 Development Board (Type-C)
147 in stock- Built in Wi-Fi module of standard 802.11
- Wi-Fi module operate in range of 2.4 GHz – 2.5 GHz
- Three modes of operation: 1. Access point. 2. Client. 3. Access point + station
- Dual core microprocessor of 32 – bit
- Operating voltage is 3.3 V
- Clock frequency from 80 MHz and goes up to 240 MHz
- SRAM memory is of 512 KB
- ROM memory is 448 KB
- External flash memory is supported and is up to 32 Mb i.e. 4MB
- Maximum current in each pin is 12 mA but 6 mA is recommended to use
- It has 36 general purpose input / output pins
- General purpose input / output pins comes up with PWM / I2C and SPI functionality
- Bluetooth version 4.2 is available and Bluetooth low energy (BLE) version
- 2 to 3.6 V operating voltage
- Deep sleep current of 2.5 µA
- 10 electrode capacitive touch support
- Hardware supported encryption for AES, ECC, RSA – 4096, SHA2
- On board PCB antenna or IPEX connector which act as external antenna
- Operating temperature lies in range of -40°C to +125°C
SKU: EAP-001351 - Development Board, Electronic Parts, ESPRESSIF(ESP), Trending Items
ESP32-C3 Super Mini Development Board
Stock outDevelopment Board, Electronic Parts, ESPRESSIF(ESP), Trending ItemsESP32-C3 Super Mini Development Board
Out of stockThe ESP32-C3 Super Mini Development Board is a compact, low-power Wi-Fi and Bluetooth 5 (BLE) development board based on the ESP32-C3 RISC-V microcontroller. It is ideal for IoT, smart home, wireless control, sensor monitoring, and embedded system projects. Its small form factor makes it perfect for space-constrained applications while maintaining excellent performance and low power consumption.
SKU: EAP-001401
