No products in the cart.
Electronic Parts
Showing 505–540 of 628 results
- Electrical & Mechanical, Electronic Parts
Union Tool 108-W257 Drill Bit Set (0.1~1mm)
8 in stock- Product Name : Mini PCB Drill Bit Set
- Material  :    Alloy Tungsten Steel
- Drill diameter  :    0.1-1.0mm
- Package Includes  :    1 x 10 pcs 0.1-1.0mm PCB Drill Bit
- application  :    precision drilling of amber beeswax, jewelry, hardware and plastics, etc.
SKU: EAP-001010 - DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
UPS Module (5V,1A)
7 in stock- Input: above 5V1A
- Output: 5V1A (max)
- Battery: polymer lithium battery, 18650 lithium battery. (The recommended capacity is below 10000ma)
- Input terminal: reverse connection protection, input overvoltage protection, automatically cut off the input power when the input exceeds 6V and switch to battery power supply mode.
- Battery terminal: Reverse connection protection Short circuit protection Reverse connection will not be damaged during charging. When the external power input exceeds 20v, the protection unit will be broken down.
- Output terminal: It can only supply ordinary loads, and cannot be connected to other power adapters, and it will burn if connected reversely. The output is short-circuited and it will not sleep when the load is small.
- Size: 33*17mm
SKU: EAP-001120 - DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
UPS Module V4CN with BMS (12V,2A,2S)
In StockDIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsUPS Module V4CN with BMS (12V,2A,2S)
74 in stock- Product Name:24W DC UPS Module
- Input Current: 2-3A
- Input Voltage: DC 12V/15V
- Output Voltage: DC 12V/15V
- Output Power: 24W (Max)
- Applicable Battery:7.4V-8.4V
- Battery Capacity:12Ah (Max)
- BMS: Yes (2S)
SKU: EAP-001118 - Battery Charging Module, DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
UPS Power Supply Module for 3.7V Li-ion Battery (5-12V Input, 9/12V Output, 12W)
In StockBattery Charging Module, DIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsUPS Power Supply Module for 3.7V Li-ion Battery (5-12V Input, 9/12V Output, 12W)
6 in stockUPS Voltage Converter Module
- Working Voltage: DC 5.0V-12.0V
- Output Voltage: DC 9/12.0V
- Output Power:9W/12W
- Support Battery(No include!):3.7V Lithium or polymer battery 15Ah(Max)
- Working Temperature range:-40℃~85℃
- Working Humidity range:0%-95%RH
- Size:50*20*6.3mm (L*W*H)
- Connect right input voltage at input terminal.
- Check output voltage by voltmeter and ammeter.
- Connect battery at B+ and B-.
SKU: EAP-001026 - Battery Charging Module, DIY Items, Electronic Parts, Module, Power Supply Module
UPS Power Supply Module v2.0 for 3.7V Li-ion Battery (5-12V Input, 9/12V Output, 12W)
In StockBattery Charging Module, DIY Items, Electronic Parts, Module, Power Supply ModuleUPS Power Supply Module v2.0 for 3.7V Li-ion Battery (5-12V Input, 9/12V Output, 12W)
178 in stock- Product Name:12W DC UPS Module
- Input Voltage: DC 5V-12V
- Output Voltage: DC 9V/12V
- Output Power: 12W (Max)
- Applicable Battery:3.7V-4.2V
- Battery Operation Data: start-up voltage 3.2V/working voltage 3.7V/discharge cut-off voltage 2.8V-2.9V/full voltage 4.2V
- Battery Capacity Range: 3Ah-15Ah
- No-load Power: 180uA-280uA
- Recommendations for Power Supply Matching: devices within 9V 1.5A or 12V 1A
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Size:50*20*6.5mm (L*W*H)
SKU: EAP-001027 - Electronic Parts, Module
USB Host Shield Compatible for Arduino
1 in stock- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
SKU: EAP-000704 - Electronic Parts, Microphone, Module
Voice Recognition Module V3
1 in stock- Operating Voltage: 4.5V – 5.5V DC
- Operating Current: < 40mA
- Communication Interface: UART (TTL Serial)
- Baud Rate: 9600 bps (Default)
- Recognition Mode: Offline Voice Recognition
- Voice Commands Supported: Up to 80 Commands
- Simultaneously Active Commands: Up to 7 Commands
- Audio Input: External Microphone (3.5mm Jack)
- Compatible Platforms: Arduino, ESP32, ESP8266, STM32, Raspberry Pi (via UART)
SKU: EAP-001408 - Component, DIY Items, Electrical & Mechanical, Electronic Parts, Sensors, Sensors, Trending Items
Water Level Float Switch Sensor (Small)
In StockComponent, DIY Items, Electrical & Mechanical, Electronic Parts, Sensors, Sensors, Trending ItemsWater Level Float Switch Sensor (Small)
203 in stockSimple to use water level sensor
Dry contact output, act like a switch, or reed switch.
Fully conceal, submerge-able
Liquid or water level detector
Model No. : ZP4510
Max Contact Rating : 10W
Max Switching Voltage : 220V DC/AC
Max Switching Current : 0.5A
Max Breakdown Voltage : 300V DC/AC
Max Carry Current : 1A
Max Contact Resistance : 100m ohmSKU: EAP-000067 - Detection & Sensor Module, Electronic Parts, Module
Water Quality Sensor Module (TDS Meter v1.0)
Stock outDetection & Sensor Module, Electronic Parts, ModuleWater Quality Sensor Module (TDS Meter v1.0)
Out of stock- Input voltage: 3.3~5.5V
- Output signal: 0~2.3V
- Working current: 3~6mA
- TDS measurement range: 0~1000ppm
- TDS measurement accuracy: ±10% F.S. (25°C)
- Size: 42*32mm
- Module interface: XH2.54-3P
- Electrode interface: XH2.54-2P
SKU: EAP-000992 - Electronic Parts, Module, Wireless Module
WIFI Transceiver Wireless Module ESP8266 (ESP-01)
31 in stock- SDIO 2.0, SPI, UART 32-pin QFN package
- Integrated RF switch, blain, 24dBm PA, DCXO, and PMU
- Integrated RISC processor, on-chip memory and external memory interfaces
- Integrated /baseband processors
- Quality of Service management
- I2S interface for high fidelity audio applications
- On-chip low-dropout linear regulators for all internal supplies
- Proprietary spurious-free clock generation architecture
- Integrated WEP, TKIP, AES, and WAPI engines
SKU: EAP-000596 - Component, DIY Items, Electrical & Mechanical, Electronic Parts, Switch, Button & Connector, Switch, Button & Connector, Trending Items
Wire Connector CH-2/ CH-3
In StockComponent, DIY Items, Electrical & Mechanical, Electronic Parts, Switch, Button & Connector, Switch, Button & Connector, Trending ItemsWire Connector CH-2/ CH-3
CH2 Wire Connector
- Type: 2Pin Connector
- Color : White
- Rated Voltage & Current & Watt : 250V/ 2A/ 100W
- Size : 19mm*17mm*13mm
CH3 Wire Connector
- Type: 3Pin Connector
- Color : White
- Rated Voltage & Current & Watt :220V/ 1-2A/ 200W
- Size : 19mm*27mm*13mm
SKU: n/a - Electronic Parts, Module, Wireless Module
Wireless Charger Receiver Module (5W, 5V)
DiscontinuedStock outElectronic Parts, Module, Wireless ModuleWireless Charger Receiver Module (5W, 5V)
Out of stock- Model: Wireless Charger Receiver Module
- Input Power: 5V 1A
- Output: 5W
- Charging Efficiency: 75%
- Transmission distance: 2-8mm
- Charger Applicable Form: Wireless Charger
- Executive Standard: Qi Wireless Charging Standard
SKU: EAP-000743 - Battery Charging Module, DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
XH-M240 18650 Li-ion Battery Capacity Tester
In StockBattery Charging Module, DIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsXH-M240 18650 Li-ion Battery Capacity Tester
4 in stock- Model: XH-M240
- Display accuracy: 0.1
- Measurement accuracy: 1mAH
- Power supply: DC 5V-12V/18650 battery (Not included)
- Standby current: 5-7mA
- Discharge current: About 500mA
- Load power: 10W, 8Ω
- Installation hole: 3mm
SKU: EAP-001022 - Battery Charging Module, DIY Items, Electronic Parts, Module, Trending Items
XH-M603 Charging Control Module With LED Display (Input DC 10-30V, 20A, Direct Output)
In StockBattery Charging Module, DIY Items, Electronic Parts, Module, Trending ItemsXH-M603 Charging Control Module With LED Display (Input DC 10-30V, 20A, Direct Output)
10 in stock- Model:XH-M603
- Input Voltage: DC 10-30V
- Current: 20A
- Display Precision:0.1V
- Control Precision:0.1V
- Output Type: direct output
SKU: EAP-000845 - DIY Items, Electronic Parts, Module, Trending Items
XL4016 Step Down Converter Module (4~40Vin, 300W, 10A)
In StockDIY Items, Electronic Parts, Module, Trending ItemsXL4016 Step Down Converter Module (4~40Vin, 300W, 10A)
27 in stock- Maximum Power Output: 300W
- Maximum Current Supply: 10A
- Input Voltage Range: 4~40V
- Output Voltage Range: 1.2V to 35V
- Step Down (Buck) Converter
- Adjustable Output Voltage
- Adjustable Output Current
SKU: EAP-001289 - DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
XL6009 DC-DC Step-up Adjustable Power Supply Module
In StockDIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsXL6009 DC-DC Step-up Adjustable Power Supply Module
186 in stock- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v
SKU: EAP-000762 - DIY Items, Electronic Parts, Module, Power Supply Module, Trending Items
XL6009 DC-DC Step-up/down (Boost-Buck) Adjustable Power Supply Module
In StockDIY Items, Electronic Parts, Module, Power Supply Module, Trending ItemsXL6009 DC-DC Step-up/down (Boost-Buck) Adjustable Power Supply Module
95 in stock- Automatic Buck Boost Converter
- Output Current: 4A
- Switching Frequency: 400 Khz
- Input Voltage: 3.8V to 32V
- Output Voltage: 1.25V to 35V
- Conversion Efficiency: <94%
- Non Isolated Buck Boost Converter
- Dimensions: 48 x 25 x 14mm (L x W x H)
Applications:
- Solar Cell
- Car Regulator
- Wind Power
SKU: EAP-001086
