No products in the cart.
Electronic Parts
Showing 541–576 of 628 results
- Component, DIY Items, Electronic Parts, Switch, Button & Connector, Trending Items
XT60 Connector
In StockComponent, DIY Items, Electronic Parts, Switch, Button & Connector, Trending ItemsXT60 Connector
- Current Rating:Â 60A continuous, with a peak current of 100A.
- Contact Material:Â Gold-plated brass for optimal conductivity and corrosion resistance.
- Wire Gauge:Â Supports cables from 12AWG to 10AWG, depending on the variant.
- Mating Cycles:Â Rated for 1000 mating cycles, ensuring long-term reliability.
- Contact Resistance: Less than 5 mΩ.
- Voltage Rating:Â Generally rated for 500V DC
SKU: n/a - DIY Items, Electronic Parts, Module, Timer Module, Trending Items
XY-J02 Timer Module (DC 6~30V, 400W, 0.1s~999mins)
In StockDIY Items, Electronic Parts, Module, Timer Module, Trending ItemsXY-J02 Timer Module (DC 6~30V, 400W, 0.1s~999mins)
52 in stock- Working voltage: 6–30V supports micro USB 5.0V power supply.
- Trigger signal source: High level triggering (3.0V – 24V) signal does not improve the system’s anti jamming capability with the system.
- Output capability: Equipment that can control DC 30V 5A or less than 220v5A.
- Static curren: 20mA working current: 50mA
- Service life: Greater than 100 thousand times
- Working temperature: -40 to 85 C;
- Size: 6.2*3.8*1.7cm
- Time range: 0.1 second (min) ~999 min (max) continuous tunable
With optocoupler isolation, enhance anti-interference ability, industrial grade circuit boards, set parameters after power failure forever
SKU: EAP-001035 - Electronic Parts, Module
YP-05 FTDI FT232L USB to TTL Converter Module
4 in stock- Chip: FT232RL. Draw out all signal port of FT232RL chip. Standard interface, compatible with a variety of official Arduino controller
- RXD / TXD transceiver communication indicator
- USB power supply, can choose 5V or 3.3V, set by jumper
- With over current protection, using 500mA self-restore fuse. Pin definition: DTR, RXD, TX, VCC, CTS, GND
- Pitch: 2.54mm.
- Size: 36 x 18mm (L x W)
- Interface: Mini USB
SKU: EAP-001168 - Detection & Sensor Module, Electronic Parts, Module
ZMPT101B AC Voltage Sensor Module
29 in stock- Output Signal: Analog 0-5V
- Operating Voltage: DC 5V-30V
- Measure within 250V AC
- Rated input current: 2mA
- Onboard micro-precision voltage transformer
- Analog output corresponding quantity can be adjusted
- Good consistency for voltage and power measurement
- Active output single-phase AC voltage sensor module
SKU: EAP-000978 - Electronic Parts, Module, OLED Display Module
0.91 OLED Display Module (Blue)
75 in stock- 0.91 inch I2C/IIC 128×32 OLED Display Module
- Work perfectly well without the need of back light.
- 128*32 high resolution, ultra wide viewing angle
- The display is self-illuminating
- Power requirement is low
- Fully compatible with multiple controlling chips including Arduino and more.
- Better performance characteristics than traditional LCD and LED displays.
SKU: EAP-000020 - Development Board, Electronic Parts, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
Stock outDevelopment Board, Electronic Parts, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
Out of stock- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-000607 - Electronic Parts, Module, OLED Display Module
0.91 OLED Display Module (White)
40 in stock0.91″ min OLED display screen with 128X32 resolution and SSD1306 chipset
Standard IIC serial communication interface pinout compatible with most MCU development board such as Arduinos, Raspberry Pi,C51 series etc.SKU: EAP-000060 - Electronic Parts, Module, OLED Display Module
0.96 OLED Display Module (128×64) (Blue)
Out of stock- Work perfectly well without the need of back light.
- 128*64 high resolution, ultra wide viewing angle
- Super low power consumption–only 0.08W when the whole screen lights up and 0.06W when displaying characters
- Fully compatible with multiple controlling chips including Arduino and more.
- Support a wide range of voltage input
SKU: EAP-000019 - DIY Items, Electronic Parts, Module, Relay Module
1 Channel Relay Module (5V,10A)
18 in stock- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: EAP-000013 - Electronic Parts, LCD Display Module, Module
128×64 Graphic LCD Display Module (Blue)
4 in stock- Built-in Controller (ST7920)
- +5V Power Supply
- 1/64 Duty Cycle
- Built-in Blue Backlight
- 12864 LCD Display Module 128×64 Dots Graphic Blue Color Backlight
- LCD display module with blue backlight.
- Small and light appearance, it is easy and convenient to use.
- Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
SKU: EAP-000014 - Electronic Parts, LCD Display Module, Module
16×2 Character LCD Display Module
- Show control information (on, off, elapsed time), temperature, time, or numbers/special characters
- Access all custom characters stored in ROM
- Debugging for microcontroller projects
- Useful in dark and bright environments
SKU: n/a - Electronic Parts, LCD Display Module, Module
16×2 LCD Display Module + I2C Expander Module
- Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
- I2C adapter allows flexibility in connections
- I2C Reduces the overall wirings
- 16 characters wide, 2 rows
- White text on the green background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
SKU: n/a - DIY Items, Electronic Parts, Module, Relay Module
2 Channel Relay Module (5V,10A)
8 in stock- Switching mains loads
- Home automation
- Battery backup
- High current load switching
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
SKU: EAP-000012 - Electronic Parts, LCD Display Module, Module
20×4 Character LCD Display Module (Blue)
17 in stock- LCD display module with blue backlight
- It can display 4-lines * 20-characters
- Small and light appearance, it is easy and convenient to use
- Suitbale for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc
SKU: EAP-000016 - Electronic Parts, LCD Display Module, Module
20×4 LCD Display Module + I2C Expander Module
- 2004 204 20X4 Character LCD Display Module Blue Backlight
- Blue & Green backlight
- Fully assembled and tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
SKU: n/a - DIY Items, Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
3 in stock- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-000011 - Component, Electronic Parts
7 Segment LED
- Widely used in set-top boxes, home appliances and instrument panels, clock displays, digital timers, and numeric displays.
- RoHS Directive-compliant.
- High luminous intensity output.
- High-efficiency.
- Low power consumption.
- Extremely low current.
- Luminous evenly distributed on each segment.
- Stable performance.
SKU: n/a - DIY Items, Electronic Parts, Module, Relay Module
8 Channel Relay Module (5V,10A)
47 in stockDC or AC signal, control, you can control the 220V AC load;
There is a normally open and one normally close contact;
The module is compliant with international safety standards, control and load areas isolation trenches.SKU: EAP-000010 - Arduino, Development Board, Electronic Parts, Trending Items
Arduino Mega 2560 R3 Development Board
In StockArduino, Development Board, Electronic Parts, Trending ItemsArduino Mega 2560 R3 Development Board
38 in stock- Bootloader – to allow downloading of ‘sketches’ via USB without having to go through other external writers.
- Powered from USB or via external PSU (not supplied). The device will automatically switch between power inputs.
- Heavy gold plate construction.
SKU: EAP-000027 - Arduino, Development Board, Electronic Parts, Trending Items
Arduino Nano Development Board
139 in stock- Board type: Arduino Nano w/ ATmega328
- Can be directly programmed with the Mini USB cable
- 100% compatible with program, expansion shields, IDE of Arduino Nano v3.0
- USB to serial TTL chip (CH340) supports win7 / win8 32bits, 64bits, Linux, MAC
- Supports ISP download
- Microcontroller: Atmel ATmega328P
- Working Voltage: 5 V
- Working current: 500mA (Max)
- Input Voltage: 7-12 V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- Flash Memory: 32 KB of which 2 KB used by bootloader
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
SKU: EAP-000028 - Arduino, Development Board, Electronic Parts, Trending Items
Arduino Uno R3 Development Board (IC)
In StockArduino, Development Board, Electronic Parts, Trending ItemsArduino Uno R3 Development Board (IC)
130 in stock- DIY project prototyping
- Developing varied varieties of projects that require a code based control
- Automation System development
- Learning AVR programming
- Entry level circuit designing
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6
SKU: EAP-000029 - Electronic Parts, Module
Bi-directional Logic Level Converter Module (TXS0108E, 3.3V5V , 8 Channel)
In StockElectronic Parts, ModuleBi-directional Logic Level Converter Module (TXS0108E, 3.3V5V , 8 Channel)
37 in stock- VCCA Voltage level: 1.2V-3.6V
- VCCB Voltage level: 1.65V-5.5V
- It can provide 3.3-5V, 1.8-3.3V level conversion
- Dimension Approx : 26 x 15 mm
- PCB Color: Blue
- 8-bit bi-directional 3.3V-5V/5V-3.3V logic level converter board
- Serial communication interface compatible with UART/IIC/SPI port easily to connect
SKU: EAP-000132 - Electronic Parts, Module
CH340 USB to TTL Converter Module
2 in stock- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
- Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
SKU: EAP-000113 - Electronic Parts, Module
CP2102 USB to TTL Converter Module
4 in stock- Included USB transceiver, without external circuit device
- With 3.3V and 5V dual power output
- With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
- Meets the USB2.0 specification requirements
- With self-recovery fuse. In the event of the accidental short circuit, it can effectively protect your computer USB port and Downloader
- Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
- The supported data format is 8 data bits, 1 stop bit and parity bits
SKU: EAP-000107 - Detection & Sensor Module, Electronic Parts, Module
DHT11 Temperature and Humidity Sensor Module
In StockDetection & Sensor Module, Electronic Parts, ModuleDHT11 Temperature and Humidity Sensor Module
386 in stock- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation)
- Temperature measuring range: 0~+50degree
- Humidity measurement accuracy: ±5.0%RH
- Temperature measurement accuracy: ±2.0degree
- Power Supply： 3.3~5.5V DC
- Output： 4 pin single row
- Interchangeability： Fully Interchangeable
- Long-Term Stability： <±1%RH/year
SKU: EAP-000003 - Electronic Parts, Module
DS3231 RTC Module
Out of stock- Weight: 8g
- Operating voltage :3.3 – 5 .5 V
- Clock chip: high-precision clock chip DS3231
- Clock Accuracy :0-40 ℃ range, the accuracy 2ppm, the error was about 1 minute
- Calendar alarm clock with two
- Programmable square-wave output
- Real time clock generator seconds, minutes, hours, day, date, month and year timing and provide valid until the year 2100 leap year compensation
- Chip temperature sensor comes with an accuracy of ± 3 ℃
- Memory chips: AT24C32 (storage capacity 32K)
- I2C bus interface, the maximum transmission speed of 400KHz (working voltage of 5V)
SKU: EAP-000006 - Electronic Parts, Module
Dual-Axis XY Joystick Module
42 in stock- Dimensions: 34 x 34 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
- Widely use in Arduino DIY projects.
SKU: EAP-000066
